Posts Tagged ‘paperclip’
July 1st, 2009 | 
Author: The fix for gamers trying to fix the red lights of death and other Xbox 360 difficulties have been found. Take a look at this guide on how to repair Xbox 360 red lights. We used the great Xbox 360 red light fix pro repair guide as the keystone of our walk through on how to repair the problem. This guide has received positive reviews from many users, who are happy with its efficiency and efficacy. You can check out my highly recommended guide and get my full review by following the link to, Xbox 360 Red Light Fix
The first step in performing the problem is taking your Xbox apart. Most folks performing the console repair are cognizant of this. However, these users may not know that they are voiding their warranty agreement by taking their system apart. You should keep this in mind when you try to take care of the Xbox. Don’t be too preoccupied by this fact when taking care of your Xbox, however. The warranty to have your console repaired isn’t as good as taking care of it yourself. You can take care of your system a lot faster than a service tech can. To learn more and get your hands on the best method to fixing your xbox 360 you can go to, How to Repair Xbox 360
Your neighborhood hardware store has all the implements you need for this project. A T-10/T-8 screwdriver, a Flathead screwdriver, a small knife, pliers, a simple paperclip, and thermal compound paste are the implements you need to finish this repair. The next tool you need, an Arctic Silver cleaning kit, may be harder to find; you may have to search online for it.
Opening the casing on your system will be your first step once you have bought all your items. This is an easy process, but it might cause some people to be worried about damaging their Xbox. Don’t be afraid of opening your console’s hard drive ventilation shields either. Handle your Xbox’s hard drive ventilation shield with caution. You can avert damaging your Xbox by handling it with caution.
While opening the ventilation shields is tough, if you follow a few simple guidelines you won’t have too much difficulty. These steps will require you to remove the Xbox’s casing and the tabs that hold the casing together. This is the part of the repair process for your system where you use the knife and it’s not a hard process. To remove the casing without harming the system, carefully follow the instructions.
This step takes a degree of caution, but shouldn’t prove difficult. To prevent errors, pay focused attention to the photos shown in the guide. Also, the directions will tell you how to access the interior of the Xbox’s hard drive.
For a more thorough examination, take a look at the Xbox’s DVD drive and the fan shroud. Act with gentleness, because the Xbox’s fan shroud can break easily. This task will be not too hard if you work patiently and follow the instructions. To get closer to the trouble spot, your next move is to remove the Xbox’s RF module. The Xbox’s Mother Board will be easy to access once you pull out the RF Module.
You can remove the console’s X Clamps once you take out the Mother Board. Once you’ve done this, you can divide the system’s heat sinks. Once you’re able to get to the Xbox’s mother board, you can switch out compromised thermal compound with Arctic Silver 5.
Once you’ve done this, you’ll need to replace a number of the system’s nylon screws, steel screws and washers. This won’t be tough if you meticulously follow the instructions in the guide. When you have done this chore you’re essentially done. Reassemble the system and you’re complete. A great video will show you how to do this part of the console repair process. You can check out all of my recommended Xbox 360 repair guides at, Xbox 360 Repair Guide
Daniel Durbin is a hardcore gaming enthusiast and Xbox 360 Fanboy. You can get direct information on how to repair xbox 360 red lights using the recommended Xbox 360 repair guide illustrated above at his website, http://www.360ProFix.com which was created to help provide Xbox 360 enthusiasts with the necessary repair guides to help them fix their broken systems.
Article Source: How to Repair Xbox 360 From the 3 Red Lights of Death For Good
One of the most complex repairs on an iPhone is a screen replacement repair, before you attempt this repair be sure to have sufficient time to complete the task, and have a clear working space for your iPhone and the replacement screen to sit in while working on them.
For a replacement screen repair it is necessary to completely disassemble the iPhone, therefore I would suggest that prior to commencing the repair get a few small pieces of paper in order to label your parts, and I particular the origin of the screws. Label them as follows; Metal Back Screws, aluminum back case, and motherboard – lay them out on the workspace in this order with a small space between them for the other iPhone components and replacement screen to lie in.
The tools and equipment required for this repair are; a case opener, a small Phillips screwdriver, a paperclip to eject the SIM tray and the iPhone replacement screen, once you have these to hand and the paper labels lined up. Be sure to have clean hands before starting the repair.
Firstly remove the SIM tray – do this by inserting the paper clip in the hole on the topside of the iPhone next to the power button, when the clip is inserted, the SIM tray should eject. Next, use the case opener to remove the plastic back of the iPhone. Lay these two components next to the paper labels, after you have fitted the replacement screen into your iPhone you will need to reverse the order of these instructions to reassemble the iPhone. For this reason, I would suggest placing them furthest from you next to the aluminum paper label.
The next step is to remove the two small screws on either side of the back securing the metal casing, and another screw located top, middle of where you removed the plastic back – placing these on the paper label. Once you have completed this, take the case opener again and carefully run it along both sides of the iPhone to loosen the back away from the frame – you will notice the metal back is secured by a wire ribbon, carefully detach this from the main section of the Iphone, not the metal back end.
The next step in the screen replacement repair needs caution – it is required to remove the iPhone antenna cable, secured by glue in three positions, carefully pry it loose of the glue spots. After this, you will need to remove 10 screws from around the sides of the iPhone, and place them on the paper label ‘Outside Case’ – after this remove the 3 screws securing the motherboard. You need to remove the motherboard at the same time as the battery as they are soldered together, once you have done this you can carefully detach the remaining iPhone frame.
The next step is to remove the LCD screen in order to fit the replacement screen – this is possibly the most difficult part of the repair and needs to be done with extreme caution. Loosen the 3 clips on the sides of the screen and slowly begin removing the LCD, you will see some wires are intertwined into the Iphone – carefully guide them through the frame and, they will slide right through.
Once you have completed this, take the iPhone screen replacement and insert it into the phone, carefully trace your steps to ensure that no errors are made when assembling the iPhone back to its original state.
This iPhone screen replacement guide was provided to you courtesy of iPhone Parts Pro– the online store for all your iPhone accessories, parts and spares to enable the fixing of your iPhone at home.
Article Source: iPhone Screen Replacement Instructions