Posts Tagged ‘installing windows’
October 7th, 2009 | 
Author: You might encounter different errors while trying to install or upgrade to Windows XP. These errors might occur due to logical or physical errors in hard disk, which cause data loss. Thus, to recover from such problems, you need to use your current backup or hard drive recovery that could recover the data.
To illustrate the same, consider that you try to install Windows XP on your computer, but fail in your attempts as Setup gives the following error message:
“Setup was unable to verify drive C:.
Your computer may not have enough memory to examine the drive, or your Windows XP CD may contain some corrupted files.
To continue, press Enter.”
As suggested, when you click Enter to this error message, you might come across another error message:
“Setup cannot access the CD containing the Windows XP installation files.”
Reinserting the disk and starting the Setup again gives the same errors, as above.
Cause
The above issue might root from any of the following possible reasons:
Windows XP is incompatible with your computer motherboard or BIOS. To determine if this is the cause, you can use Microsoft Windows Upgrade advisor located on Windows XP Setup disk that checks current hardware and software compatibility with Windows XP.
You are trying to install from a damaged Windows XP Setup CD
You are trying to install on a physically or logically crashed hard disk. To know the exact problem, use Windows XP Recovery Console to run chkdsk command-line tool. If this could detect and access your hard disk, the issue is file system corruption or MBR damage. However, if this could not, your hard disk is physically faulty.
Solution
Following solutions can help you recovering from such problems:
If Microsoft Windows Upgrade advisor reports that your motherboard or BIOS is incompatible with Windows XP, try replacing the problematic hardware or software
Try using a different Windows XP installation CD
Run chkdsk. If hard disk is not accessible, replace it and contact Data Recovery experts to recover data. However, if running chkdsk doesn’t fix existing hard disk issues, try using fixmbr and fixboot commands or reformat the hard disk. For recovering data thus lost, use your backup or a suitable Partition Recovery product to recover it. These are powerful Data Recovery Tools designed specifically to scan a logically crashed disk and locate the missing data.
Stellar Information Systems Limited is one of the leading Data Recovery company providing industry’s best disk recovery software and services. Stellar Phoenix Windows Data Recovery is a safe and user-friendly recovery tool for Windows 7 RC1, Vista, XP, 2003 and 2000 systems. Stellar is also known for comprehensive and advanced recovery service for all types of hard drives through Class 100 Clean Rooms.
K madhav is a data recovery expert and doing research on data recovery software and hard drive recovery
Article Source: ‘Setup was unable to verify drive’ Error Installing Windows XP
You can install Windows XP in dual-boot configuration with an existing Windows NT based operating system. Such installation allows you to choose either of the operating systems while starting the computer system. At times, when Windows XP is configured for dual-boot, it might fail to start displaying an error on screen. This might occur if the existing Windows operating system has replaced the boot files of Windows XP, thereby has resulted into an unbootable system. You might need to use your backup to restore the data thus lost. But if no valid backup is available that could give the desired results, you will need to use powerful data recovery software.
For an instance, you are using Windows XP that is configured in dual-boot configuration. You might receive the below error message when trying to boot your Windows XP installation:
“Windows XP could not start because the following files were missing or corrupted:
WINDOWS\SYSTEM32\CONFIG\SYSTEM NTLDR MISSING
You can try to repair this file by starting the Windows Setup program from original floppies or boot from CD-ROM.
Select ‘r’ at first screen to repair”
You cannot access the data that is stored in Windows XP installation.
Cause
As the error suggests, it occurs when system fails to access Windows XP boot files: Ntldr and Ntdetect.com. This usually occurs when you are using Windows NT 4.0 with Windows XP and Windows NT 4.0 has replaced the shared boot files since it doesn’t recognize Windows XP startup features. Such behavior might result if any of the below conditions is true:
You have installed Windows XP before installing Windows NT 4.0
You have recently reinstalled Windows NT 4.0
Solution
To solve the problem, described above, you need to replace the corrupt Ntldr and Ntdetect.com files by following these steps:
Boot the system from Windows XP installation disk and start Recovery Console
Use fixboot command at the prompt and then press ENTER
If the above measures fail to work, reformat the drive and reinstall Windows XP. Restore lost data from backup thereafter.
There might be situations when you find that data backup as invalid or absent. To cope up with such scenarios, use data recovery software. Such tools serve as advanced data recovery utilities with rich interface and safe recovery techniques.
You need to use data recovery tools to successfully recover lost data if backup is absent or is not valid. Data Recovery Software are advanced applications designed to recover lost data while any condition of logical data loss.
Stellar Phoenix Windows Data Recovery is a fully-featured recovery application designed for Windows 7 RC1, Vista, XP, 2003 and 2000 based system. It is a non-destructive Data Recovery Software to support recovery from all hard drives, CDs, USB drives and more. It supports FAT32, VFAT, NTFS and NTFS5 file system drives.
Bury Shane is a data recovery expert doing research from last 6 years on disk data recovery software and computer data recovery.
Article Source: Windows XP Fails to Boot in Dual Configuration
You can install Windows XP in dual-boot configuration with an existing Windows NT based operating system. Such installation allows you to choose either of the operating systems while starting the computer system. At times, when Windows XP is configured for dual-boot, it might fail to start displaying an error on screen. This might occur if the existing Windows operating system has replaced the boot files of Windows XP, thereby has resulted into an unbootable system. You might need to use your backup to restore the data thus lost. But if no valid backup is available that could give the desired results, you will need to use powerful data recovery software.
For an instance, you are using Windows XP that is configured in dual-boot configuration. You might receive the below error message when trying to boot your Windows XP installation:
“Windows XP could not start because the following files were missing or corrupted:
WINDOWS\SYSTEM32\CONFIG\SYSTEM NTLDR MISSING
You can try to repair this file by starting the Windows Setup program from original floppies or boot from CD-ROM.
Select ‘r’ at first screen to repair”
You cannot access the data that is stored in Windows XP installation.
Cause
As the error suggests, it occurs when system fails to access Windows XP boot files: Ntldr and Ntdetect.com. This usually occurs when you are using Windows NT 4.0 with Windows XP and Windows NT 4.0 has replaced the shared boot files since it doesn’t recognize Windows XP startup features. Such behavior might result if any of the below conditions is true:
You have installed Windows XP before installing Windows NT 4.0
You have recently reinstalled Windows NT 4.0
Solution
To solve the problem, described above, you need to replace the corrupt Ntldr and Ntdetect.com files by following these steps:
Boot the system from Windows XP installation disk and start Recovery Console
Use fixboot command at the prompt and then press ENTER
If the above measures fail to work, reformat the drive and reinstall Windows XP. Restore lost data from backup thereafter.
There might be situations when you find that data backup as invalid or absent. To cope up with such scenarios, use data recovery software. Such tools serve as advanced data recovery utilities with rich interface and safe recovery techniques.
You need to use data recovery tools to successfully recover lost data if backup is absent or is not valid. Data Recovery Software are advanced applications designed to recover lost data while any condition of logical data loss.
Stellar Phoenix Windows Data Recovery is a fully-featured recovery application designed for Windows 7 RC1, Vista, XP, 2003 and 2000 based system. It is a non-destructive Data Recovery Software to support recovery from all hard drives, CDs, USB drives and more. It supports FAT32, VFAT, NTFS and NTFS5 file system drives.
Bury Shane is a data recovery expert doing research from last 6 years on raid data recovery and computer data recovery.
Article Source: Windows XP Fails to Boot in Dual Configuration
In order to install Windows on your system, you must activate the product using a valid product key. After you enter a product key while installing Windows if system reports it invalid, the possibility is that you have entered a wrong product key. But if you are sure that the key entered is valid, there might be several reasons causing this behavior including hard drive damage. In case of hard drive damage, you need to replace it and restore lost data from backup. But if backup fails to restore, hard drive recovery solutions come as rescue.
While trying to install Windows XP on your computer, when you try to enter the product key, you encounter the similar error displaying on screen:
“The CD Key which you entered is invalid. Please try again.”
You might also receive an error telling that the product key used is invalid.
Cause
The above error might be the outcome of below possible reasons:
1. Using an invalid product key
2. An antivirus program is scanning the computer
3. Windows XP installation CD is damaged
4. Hard disk is damaged
5. Incorrect system date in CMOS (Complementary Metal-Oxide Semiconductor) settings
6. Some extra drivers are installed that are interrupting the installation
Solution
You should follow these steps to solve the existing problem:
1. Make sure that the product key you are entering is correct. Try making use of keyboard number keys instead of numeric keypad
2. Disable antivirus software scan. You need to ensure that no antivirus software is turn in computer BIOS
3. Replace the Windows XP installation CD if damaged
4. Ensure that the hard disk is not damaged. If it is, replace the hard disk and restore lost data from backup. Contact hard drive recovery service professionals if no or invalid backup is available.
5. Verify CMOS settings for correct system date
6. To provide clean installation of Windows, restart Windows without the installed extra drivers
7. You can also try copying Windows XP installation files to hard drive using command prompt
Hard Drive Recovery
It is the dedicated help provided by recovery experts to recover lost data from physically crashed drives. hard drive recovery software professionals undergo several sophisticated processes using advanced techniques in Clean Rooms in order to recover the lost data.
Stellar Information Systems Limited is the leading organization with highest success rate in providing safe hard drive recovery service. Its service caters all types of hard drives, including SCSI, SATA, IDE, EIDE and PATA. Stellar has Class 100 Clean Rooms and industry’s best recovery experts to facilitate advanced data recovery.
Robin Watson a student of Mass Communication doing research on hard drive data recovery software . He is also a freelancer for http://www.windows-data-recovery.net/
Article Source: System Reports Invalid Product Key while Installing Windows XP
In order to resolve earlier bugs and provide new set of features, Microsoft provides its latest updates of Windows version as service packs. Windows Vista Service Pack 1 and Windows Vista Service Pack 2 are two service packs that come available with major hardware and software support updates. At times, when you try to install either of the service pack on your Windows Vista based system, the installation fails and gives error while you try to boot the system. Such situations might force you to reformat the hard drive and restoring the lost data from backup. In cases when backups prove inefficient to restore the lost information, you should use hard drive recovery software to completely recover the lost data.
As an example, you attempt to install Windows Vista SP1 or Windows Vista SP2. The setup runs successfully through Stage 1 and Stage 2. But at Stage 3, after the second reboot, system fails to start. You observe a black screen displaying the below error message:
“Error: 0xc0000034”
Solution
To fix this error, perform following steps:
1. Boot your system using Windows Vista recovery disc or DVD
2. Next, choose the language option when prompted for
3. Choose ‘Startup Repair’ option in ‘System Recovery’ options
4. The ‘Windows Vista Recovery Environment’ should prompt to restore the system to an earlier restore point. Click ‘Yes’ to automatically restore the system
5. If it doesn’t prompt any such option, you need to start ‘System Restore’ manually in System Recovery options. This will allow the system to get back to the state when system was actually working
6. If problem persists, you need to reformat the hard drive and reinstall Windows. Use your last clean backup to get all the data.
Sometimes, backup fails to restore data because it is corrupted, not updated or absent. Such situations require that you scan your hard drive using hard drive recovery software. Designed with powerful and safe hard drive scanning technology, these applications provide effective hard drive data recovery in all logical data loss cases. Moreover, they empower you with graphically rich user interface.
Stellar Phoenix Windows Data Recovery is the powerful Hard Drive Recovery application that is compatible with Windows 7 (currently in RC1), Vista, XP, 2003 and 2000. The application uses advanced searching procedures and provide Disk Imaging and Drive Cloning like features. It is a suitable product to be used with NTFS5, NTFS, VFAT and FAT32 file systems
Garry Thomson a student of Mass Communication doing research on hard drive recovery software . He is also a freelancer for http://www.windows-data-recovery.net/
Article Source: Error: 0xc0000034 while Installing Windows Vista SP1 or SP2
Windows Vista is a popular operating system used for personal computers, business desktops, laptops, media center etc. But when you try to install or upgrade it, you might receive few errors that may prevent you to continue the process. During such situations, one of the typical reasons is that Windows Vista or Windows Vista setup fails to access the hard drive, probably due to hard drive damage. Thus, you are required to immediately replace your hard drive and restore as much data possible from backup. In case of backup issues when you cannot get the required information, hard drive data recovery tools are available to recover it.
While trying to install Windows Vista, you might encounter a Stop error:
“Stop: 0×0000007B”
This error occurs when Windows Vista cannot access the hard drive that contains the startup files for Windows Vista.
Cause
You get 0×0000007B error in any of the possible situations:
1. No compatible driver for the disk controller is located by Windows Vista
2. Your hard drive cabling is damaged or not connected properly
3. Your computer is affected by a boot sector virus
4. Incompatible computer BIOS
5. MBR (Master Boot Record) is being used by another program
6. Hard drive is damaged
Solution
To solve the existing issue, consider following these methods:
1. If you are attempting clean install of Windows Vista or trying to upgrade it, the problem is typically related to absent or incompatible driver, required to be provided. Download Windows Vista drivers and use Load Driver option of Windows Vista setup to install them
2. Make sure that your hard drive and interface cables are healthy and properly connected
3. Scan the computer for viruses
4. If BIOS incompatibility is the issue, replace your motherboard
5. Wait till the program using MBR completes its task
6. If hard drive is damaged, replace it and restore from backup. Consult hard disk recovery service technicians for their manual data recovery help, if you find that your backup cannot give required results or is currently unavailable. Hard Drive Recovery service includes all technical steps to recover data.
Stellar Information Systems Limited provides best and unmatched Hard Drive Recovery service. Its recovery solutions are available for all types of hard disks, involving SCSI, IDE, EIDE and SATA. The company has Class 100 Clean Rooms to offer secure Hard Drive Data Recovery. Stellar has rich experience and proven record in providing leading disk recovery service.
Robin Watson a student of Mass Communication doing research on hard drive recovery software . He is also a freelancer for http://www.windows-data-recovery.net/
Article Source: Stop Error 0×0000007B while Installing Windows Vista
Computers with Extensible Firmware Interface (EFI) use GUID Partition Table (GPT) as the standard hard disk partitioning system. Intel proposes it as the replacement for the PC BIOS that uses Master Boot Record (MBR).In GPT partitioned disks, data that is important to platform operation is placed in partitions and not in hidden or unpartitioned sectors as done in MBR partitioned disks. Due to this and similar other factors, you sometimes observe issues, especially while installing a Windows operating system. To solve such issues, you might need to delete all hard disk partitions and opt for suitable partitioning scheme. This deletes all data and thus to restore information, you require using your recent data backup that should be complete and valid to restore data. However, if data backup is not updated, is corrupt or absent, you can use hard drive recovery applications to scan and recover your data.
As a practical instance, when you attempt to install Windows Server 2003, a x64-based Windows Server 2003 version or Windows XP, you might receive the below error message:
“Setup cannot install to the selected partition.
You can only install to GPT disks on IA-64 machines and MBR disks on X-86 machines.
You can only upgrade installations on GPT disks on IA-64 machines and MBR disks on X-86 machines.
To go back to the previous screen press ENTER”
Cause
This error message occurs if these both conditions are true:
An operating system is already installed on hard drive or it had an operating system, which has now been removed.
Hard drive is GPT formatted
You fail to install required operating systems on GPT hard drives because of following reasons:
On GPT hard drives, you can only set up Windows Server 2003 on systems that are Itanium-based.
You can’t set up Windows x64 and Windows 32-bit operating systems on GPT based hard drives.
Solution
You need to convert your GPT hard drive to a MBR hard drive. You can use Disk Management or Diskpart command for it, if an operating system is already installed. You can also delete all existing hard drive partitions while running Setup program and opting for the option to convert the partitioning scheme. In Windows Server 2003-based systems, it must have Windows Server 2003 Service Pack 1 installed. After this, you can restore lost information from backup. If backup produces errors or has not been taken, you can use Hard Drive Recovery applications.
Stellar Phoenix Windows Data Recovery is a complete and robust hard drive recovery software . It supports FAT16, FAT32, VFAT, NTFS and NTFS5 file system based drives and volumes. It is a read-only Hard Drive Recovery application. It is compatible with Windows 7 ( currently in RC1), Vista, Server 2003, XP and 2000).
Simpson a student of Mass Communication doing research on hard drive recovery software. He is also a freelancer for partition recovery software .
Article Source: Problems Installing Windows on GPT Hard Disks
Microsoft Windows XP is a popular operating system for personal computers, media centers, notebook computers and workstations. You can install Windows XP as a clean operating system copy or by upgrading from an existing version of Windows like Windows 98 SE. You should always maintain an updated data backup when you upgrade your operating system or opt for a clean reinstall. By using an up-to-date backup, you can restore all lost data post events like Windows XP upgrade failure, partition deletion, accidental/erroneous disk format operation, power failure and more. If you lose data and no valid data backup is available, you can use commercial data recovery software for complete recovery.
Consider a situation, you try to install Windows XP and it fails with an error message as:
“STOP: 0×0000000A (parameter1, parameter2, parameter3, parameter4)
IRQL_NOT_LESS_OR_EQUAL
*** Address x has base at x – filename”
Where, parameter1, parameter2, parameter3 and parameter4 refer to incorrectly referenced address, required IRQL, type of access, and address of instruction referencing memory in parameter1respectively. You may also get this error message after installing Windows XP. It is specific to Windows XP Professional and Home Edition.
Cause
It occurs when system attempts to touch pageable memory at too high a process IRQL (Interrupt Request Level). It happens in kernel mode due to these reasons:
• Driver utilizes an incorrect memory address
• Incompatible device driver or software
• Hardware issues
Solution
If you encounter the above error while installing Windows XP, you need to follow these steps:
• Make sure that installed hardware components are compatible with Windows XP
• Specify HAL (Hardware Abstraction Layer) during installation startup using F5 during the startup of installation
• Try to turn off some features in CMOS (Complementary Metal Oxide Semiconductor) settings
• Verify RAM
• Try removing adapters and disconnecting hardware devices
• Update drivers
• Go for a clean installation of Windows XP and restore data from backup
If this problem arises after installing Windows XP, use these methods:
• If you have recently installed any third-party hardware or software, try removing or disabling them
• Restore system to Last Known Good Configuration
• Try to repair Windows XP installation
• If Safe Mode is working, use Rollback Driver feature
• If Safe Mode is working, use Windows XP System Restore
• Try renaming problematic software or driver
• Restore Windows using Recovery Console
• Reformat the hard disk and use recent data backup to restore the data.
If after reformatting the hard disk, you discover that backup is not up-to-date or is unable to deliver expected results, you need to choose efficient hard drive recovery utilities to recover all lost data. These hard disk recovery tools are designed to safely scan your drive and recover lost files.
Phoenix Windows data recovery software is the finest data recovery tools.
It is equipped with advanced features like RAW Recovery, Drive Imaging, E-Mail Recovery and more. The software supports FAT16, FAT32, vFAT, NTFS, and NTFS5 file systems based Windows partitions and volumes. It is compatible with Windows Vista, XP, 2003 and 2000.
K madhav is a data recovery expert and doing research on data recovery software and hard drive recovery.
Article Source: Tips How to STOP Error 0xA While or After Installing windows XP
While creating a swap file in Windows, you may encounter the following error message that may prevent you from doing so:
“The partitioning scheme used on your hard disk prevents the creation of a permanent swap file.”
The swap file is a hard drive space that is used as virtual memory extension for computer’s RAM (real memory). It improves the system performance. You can organize a swap file as contiguous space so that less I/O operations are needed to read/write complete file.
You get this error message whether you are using a Virtual Memory dialog box while installing Windows or 386 Enhanced options in Control Panel for creating swap files.
This error message could result from any of the following:
A virus
A partition manager
Uninitialized fields in partition table
Microsoft Windows keeps complete information of what hard drive it uses when it makes permanent swap files. If you incorrectly modify the hard drive that is formatted using third party software, Windows may find it invalid and thus display disk errors and cause data loss. To avoid such data loss situations, Windows ensures that it recognizes the accurate hard drive information.
In any case, if you incorrectly modify the hard drive, you may encounter serious partition loss problems. This situation generally occurs in following cases:
You are using a dual-boot system and both operating systems are using different partition schemes.
You computer is infected with viruses. Some viruses may create their own disk partitions and set them as boot partitions (for instance Michelangelo virus).
No matter what the cause of this problem is, the ultimate result would be the loss of your hard drive partitions and you need to carry out Partition Recovery. Partition Recovery is best possible using third party tools, known as Partition Recovery Software.
Stellar Information Systems Limited, the ultimate data recovery company provides Stellar Phoenix Windows Data Recovery. It is the most comprehensive tool with extremely powerful partition recovery software features. It is capable of handling even the most severe partition loss scenarios. It performs Partition Recovery in FAT16, FAT32, VFAT, NTFS and NTFS 5 file systems based Windows partitions. It supports the latest version of Windows Vista, XP, 2003 and 2000 operating systems. It is a user friendly and self descriptive application.
You can download a demo version of Stellar Phoenix Windows Data Recovery 3.0.0.2 from Stellar’s website and other popular download websites to check the software features in terms of how much lost data can it recover.
Simpson is a freelancer for Stellar which offers partition recovery software and file recovery programs for different OS and file system including data recovery mac,pst repair, data recovery linux, pst recovery and many other programs.
Article Source: Incorrect Modification of Hard Drive Causes Partition Loss
For users, who want dual booting between Mac OS X and Windows XP or Vista, Boot Camp will allow you to do so. This is an assistance tool, which comes with Leopard and works on Intel based Macintosh systems. The software lets you have safe repartitioning of the Mac hard drive and helps installing Windows.
But, due to one or the other reasons, some users are reporting a strange error with the software. When the user attempts repartitioning with the application, the following error may pop up:
“The disk cannot be partitioned because some files cannot be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again”
Also, if you look in /var/logs/system.log file for further descriptive look of the problem, the error may be like:
“Sep 1 14:55:30 chmac kernel[0]: hfs_truncatefs: couldn’t reclaim space on Macintosh HD”
The problem may be the outcome of:
Ø Operating system installation faults
Ø Parallels VM marked unmovable
Ø Insufficient Disk Space
Ø External drives connected
Ø Sharing Options turned on
So try resolving the issue by reinstalling the operating system, deleting the parallels VM file, freeing the hard disk from useless and large files, disconnecting the external drives or turning off the sharing options. See if, either of them helps. But, make sure that you have all the data backed up before reinstalling OS, unless to require Mac data recovery.
However, Boot Camp also put restriction on the Windows partition that the lowest limit must be of 5 GB and it must leave the same amount of free space for Mac partition. So see, if this is not creating the problem.
And those, who have lost data due to installation of Mac OS or while deleting some important file can have Mac recovery with the third party applications. Data recovery Mac software are designed to run the powerful scanning procedure on the Mac hard drive so as to retrieve the lost data.
Stellar Phoenix Macintosh Data Recovery software is counted top in list, whenever Mac data recovery utilities are counted. This Mac recovery utility is safe and effective to recover the lost data in any case. Equipped with the interactive interface, this data recovery Mac software is compatible with HFS, HFS+, HFSX and HFS Wrapper file systems.
Simpson is a freelancer for Stellar which offers data recovery software and file recovery programs for different OS and file system including data recovery mac, data recovery linux, mac data recovery , pst recovery and many other programs.
Article Source: Boot Camp Error in Mac