Posts Tagged ‘flathead screwdriver’
July 1st, 2009 | 
Author: The fix for gamers trying to fix the red lights of death and other Xbox 360 difficulties have been found. Take a look at this guide on how to repair Xbox 360 red lights. We used the great Xbox 360 red light fix pro repair guide as the keystone of our walk through on how to repair the problem. This guide has received positive reviews from many users, who are happy with its efficiency and efficacy. You can check out my highly recommended guide and get my full review by following the link to, Xbox 360 Red Light Fix
The first step in performing the problem is taking your Xbox apart. Most folks performing the console repair are cognizant of this. However, these users may not know that they are voiding their warranty agreement by taking their system apart. You should keep this in mind when you try to take care of the Xbox. Don’t be too preoccupied by this fact when taking care of your Xbox, however. The warranty to have your console repaired isn’t as good as taking care of it yourself. You can take care of your system a lot faster than a service tech can. To learn more and get your hands on the best method to fixing your xbox 360 you can go to, How to Repair Xbox 360
Your neighborhood hardware store has all the implements you need for this project. A T-10/T-8 screwdriver, a Flathead screwdriver, a small knife, pliers, a simple paperclip, and thermal compound paste are the implements you need to finish this repair. The next tool you need, an Arctic Silver cleaning kit, may be harder to find; you may have to search online for it.
Opening the casing on your system will be your first step once you have bought all your items. This is an easy process, but it might cause some people to be worried about damaging their Xbox. Don’t be afraid of opening your console’s hard drive ventilation shields either. Handle your Xbox’s hard drive ventilation shield with caution. You can avert damaging your Xbox by handling it with caution.
While opening the ventilation shields is tough, if you follow a few simple guidelines you won’t have too much difficulty. These steps will require you to remove the Xbox’s casing and the tabs that hold the casing together. This is the part of the repair process for your system where you use the knife and it’s not a hard process. To remove the casing without harming the system, carefully follow the instructions.
This step takes a degree of caution, but shouldn’t prove difficult. To prevent errors, pay focused attention to the photos shown in the guide. Also, the directions will tell you how to access the interior of the Xbox’s hard drive.
For a more thorough examination, take a look at the Xbox’s DVD drive and the fan shroud. Act with gentleness, because the Xbox’s fan shroud can break easily. This task will be not too hard if you work patiently and follow the instructions. To get closer to the trouble spot, your next move is to remove the Xbox’s RF module. The Xbox’s Mother Board will be easy to access once you pull out the RF Module.
You can remove the console’s X Clamps once you take out the Mother Board. Once you’ve done this, you can divide the system’s heat sinks. Once you’re able to get to the Xbox’s mother board, you can switch out compromised thermal compound with Arctic Silver 5.
Once you’ve done this, you’ll need to replace a number of the system’s nylon screws, steel screws and washers. This won’t be tough if you meticulously follow the instructions in the guide. When you have done this chore you’re essentially done. Reassemble the system and you’re complete. A great video will show you how to do this part of the console repair process. You can check out all of my recommended Xbox 360 repair guides at, Xbox 360 Repair Guide
Daniel Durbin is a hardcore gaming enthusiast and Xbox 360 Fanboy. You can get direct information on how to repair xbox 360 red lights using the recommended Xbox 360 repair guide illustrated above at his website, http://www.360ProFix.com which was created to help provide Xbox 360 enthusiasts with the necessary repair guides to help them fix their broken systems.
Article Source: How to Repair Xbox 360 From the 3 Red Lights of Death For Good
Let me guess, you have become victim of the infamous Xbox 360 three flashing lights, right? If you don’t know by now, the root cause of this error is due to a “General Hardware Failure”. This problem has also been categorized as “error 0102″, E74 and the 3 Red Rings of Death(RROD).
Many people assume that upon receiving the 3 red flashing lights, their Xbox 360 is a total brick and no longer have a use for it other than a large paper weight. Some figure that they’ll send out the xbox 360 to Microsoft hoping for a permanent fix since it’s still under warranty. Only to find out later that not only did they spend over $100+ in shipping, wait 6 to 8 weeks wait for your xbox back, but also had to send their xbox 360 multiple times to Microsoft. Quite frustrating eh? Trust me, I have heard all the horror stories and none had anything good to say about Mr. Bill Gates.
My best advise is to first take the Xbox out of the garbage because there is hope, since you can fix it yourself – permanently. If you don’t mind taking the time to open the xbox (shown below) and placing a few household items in place within the xbox, then you’ll be on your way within 2 hours(assuming that you know nothing about the inside of your xbox 360). There are repair tutorials all over the internet, but the one that seems to be the most popular and the one I personally used, was from x-box360redlightfix.com. From the reviews on online forums, most people have been able to get their xbox 360 fixed in about an hour using this tutorial, the website however guarantees to get you going in 2 hours or less. Not bad huh? It was quite easy for me – for instance, to open the xbox all you need are the 3 tools(shown below)and it will be open in less than 5 minutes.
- Something thin, strong and pointy (for the rear case clips)
- A small flathead screwdriver
- A Torx screwdriver – sizes 9 & 10 (check your tool box or local hardware store)
If you however want to surf a bit longer only to get frustrated with unproven results and strategies – then you must have a couple of weeks to spare. Trust me, I’ve tried many methods only to have my xbox in pieces and making the matter even worse. So, take it from me – save the time and frustration and just fix it yourself the smart way – not the hard way.
Good Luck and Happy Gaming! =)
Just your average gamer that had some extra time on his hands
- HALO RULES!!!
Article Source: How to Fix the Three Red Lights Error on Your XBOX 360