Posts Tagged ‘error messages’
November 3rd, 2009 | 
Author: In some cases, when you install/ re-install the operating system, upgrade the motherboard or replace the hard drive, the system may prompt an error message. This generally happens due to hard drive failure. In the case of hard drive failure, you may not be able to access the data stored in the hard drive. Furthermore, the situation can get worse and you may eventually lose your data. Thus, you need to maintain a valid and updated data backup to safeguard your data against loss. However, if you fail to maintain a backup, or the backup is incomplete, then you will need to use professional Data Recovery Services to recover your data completely.
For instance – When you try to boot your computer, you may encounter any of the following error messages:
“Invalid System Disk”
or
“Non System Disk Error”
The above error message mainly occurs due to failure of hard drive. As a result of the above error message, the hard drive data becomes inaccessible.
Cause:
Following can be the possible causes for the above error message:
CMOS or BIOS is not setup properly.
Unavailability of bootable files on the hard disk drive.
Unbootable Floppy or CD is currently in the computer.
The hard disk drive is improperly connected.
Resolution:
To resolve the above issue, consider the below measures:
Make sure that your hard disk is setup and detected properly in BIOS.
If you have not changed the software or hardware configuration of your computer, then you need to check the hard drive jumpers, as it might be the reason due to which your computer failed to detect the hard drive.
Make sure that no Floppy diskette or CD is currently in the computer system.
Make sure that the hard drive is connected properly. But, if the hard drive is properly connected and you still face the same error, the it might be the case of hard drive crash. In such situations, you will need to use Hard Drive Recovery Services to recover your data back from crashed hard drive. These services are provided by Data Recovery companies. The task of Data Recovery Services is performed by highly talented and knowledgeable technicians who employ sophisticated techniques for absolute recovery of your data.
Stellar Information Systems Limited is the world’s most trusted brand that provides specialized Data Recovery solutions all over the world. Stellar assures complete and accurate recovery of data from Server, RAID, NAS and SAN hard drives after almost all data loss scenarios. With 16 years of sound experience in providing Data Recovery Services, the company holds more than 1,000,000 satisfied customers across the world.
Shaun Pattrik has 6 Years of Experience in the Software Technology researching with Stellar Info. System Ltd which offers data recovery, data recovery services, data recovery NJ and Hard drive recovery services.
Article Source: Dealing with “Invalid System Disk Error”
A Microsoft Outlook PST file is prone to several errors that can corrupt and make it inaccessible as a result. General errors are unexpected shutdown, network vulnerabilities, large PST size and virus infection. The Microsoft Inbox Repair Tool is a built-in utility that can solve and repair corruption issues associated with Outlook Personal Folder (.pst) file. But if the damage is of high extent, the tool might fail to correct it. Thus, it is required that you should restore the lost data from the most recent backup available. If this is not feasible or you find it invalid too, commercial tools can help to Repair PST. These tools come integrated to scan the damaged PST file using efficient algorithms.
To illustrate, consider you use Microsoft Outlook for email management. You might receive the below error message when trying to open the application:
“Outlook encounters a problem while opening, starting the program in safe mode may solve the problem although some functionalities may be disabled in this mode, Start in safe mode? YES or NO?”
Clicking ”NO’ to the error message hangs Outlook, however, when you click ‘Yes’, it gives another error and the application fails to launch.
Cause
Outlook can fail to open with similar error messages, as above, due to following reasons:
1-PST is quite large to be opened by Outlook. In Outlook 97-2002, the default size-limit of PST to increase is 2 GB. Outlook might find it problematic if file size goes beyond this value.
2-A third-party application is integrated to access Outlook data
3-PST is corrupted
Solution
To troubleshoot the existing issue, you need to follow these methods:
1-Check PST size. If it appears to be file-size issue, use Microsoft Crop utility to truncate the file. You should backup the file prior to apply the tool as it can delete some email messages and other contents.
2-Try to disable the application accessing Outlook resources and data
3-If these measures fail, the PST might be corrupted. Run Inbox Repair Tool (Scanpst.exe) to try isolating the corruption errors:
1-Click Start | Find (or Search)
2-Type scanpst.exe in ‘Search for files or folders’ named box
3-Open Inbox Repair Tool by double-clicking the file icon
4-Specify the PST file path or click Browse to locate it
5-Click Start and the repair process will start
6-Quit the tool after it finishes
If the damage is large enough that Inbox Repair Tool cannot fix it, use a third-party PST Repair Tool to repair and restore it efficiently. These are powerful tools to Repair PST and prove competent to maintain its integrity.
Author have more than 6 Year of Experience in Computer field, member of Internet Marketing Society, has Specializing in Pst Repair Software. For More Information visit http://www.repair-outlook-pst.com
Article Source: Outlook Prompts to Start in Safe Mode
Booting process includes various procedures that the operating system undergoes to perform all system checks and load the necessary files to enable proper functioning of the computer system. At times, the operating system fails to boot because of corruption in any of the files needed for boot up. This corruption can be caused by various reasons like improper system shutdown, virus infection, file system crash, etc. In such situations, the system becomes unbootable and the data stored in the hard drive becomes inaccessible. An ideal way to overcome such situations, is to restore the data from an updated backup. However,if the backup is not available, then it is recommended to use a good quality Windows Data Recovery Software to recover your lost data completely.
Sometimes, when you start your Windows based system, it fails to boot and displays either a blank screen or error messages similar to the following:
NTLDR is missing.
Invalid partition table.
Disk read error has occurred.
Windows could not start because the File X is missing or corrupt.
Operating system not found .
Missing or corrupted system files.
Software or device driver conflict.
Cause:
Following are the main reasons that can lead o boot up errors.
Improper changes made in BIOS.
Corrupted or failed hardware peripherals.
Corrupted system files, software or registry.
Missing, corrupted or incompatible device drivers.
Error in partition table, boot sector or Master boot record.
Resolution:
There can be various possible methods to resolve this issue, but the easiest method is to restore your system to Last Known Good Configuration by entering BIOS.
In case, you fail to resolve this issue by using the above method, then your operating system may get corrupt. In this scenario, you will need to re-install the operating system. When you perform a clean re-install of the operating system, all the previously stored data gets deleted. In this case, you need to use an effective Windows Data Recovery Software to recover and restore your lost data completely. These Windows Data Recovery tools employ powerful scanning algorithms to ensure quick and accurate recovery of your data. These Windows Partition Recovery applications provide highly enriched graphical user-interface that makes them user-friendly and self-explanatory.
Stellar Phoenix Windows Data Recovery v4.1 is an outstanding software recovers your lost, missing or inaccessible data comprehensively after almost all data loss scenarios. The Windows Data Recovery application is fully competent enough to recover data from FAT32, VFAT, NTFS, and NTFS5 based file systems. The read-only software is compatible with Windows7 RCI, Vista, XP, 2003, and 2000 operating systems.
Robin Watson is B-Tech student and is doing research on how to recover windows files with the help of data recovery software .
Article Source: Some Useful Tips to Resolve Windows Boot Up Errors
Hard drive is the primary storage unit of the computer, where the operating system, applications and system files are stored. It is a unit that stores and provides access to data on electromagnetically charged surfaces. But no matter how reliable the hard drive could be, it is bound to fail someday. Hard disk failure can occur when there is a breakdown of the hard drive due to which you hear some strange ticking sounds from the hard drive. This results in inaccessibility of hard drive data. To overcome such situations, a valid and recent data backup may prove handy in restoring the data. However, if the backup is absent or corrupt, or incomplete, there it is recommended to use professional Hard Drive Recovery Services.
For instance – Sometimes, when you try to boot your system, you observe some strange behavior of your system, due to which you fail to access the data stored on the hard drive.
Or
When you start your system, the hard drive may not be recognized by the system and you hear some strange sounds from the hard drive.
Generally, you may also receive some error messages, similar to the following:
“No system disk present”
“Hard disk not found”
“Disk boot failure”
Your hard drive data becomes inaccessible after the occurrence of the above error messages.
Cause:
The main causes for the above situations are:
Hard drive malfunctioning.
Failure of internal components, – such as disk assembly, read/ write head, platters, etc.
However, the ticking sound of the hard drive indicates head crash that occurs when head touches the disk platters.
Resolution:
To get your data back from physically damaged hard drive, you will need to consult a reputed Data Recovery company. These companies employ the experience of highly qualified and knowledgeable technicians to provide specialized Hard Drive Recovery Services. The Data Recovery technicians repair and replace the damaged components of the hard drive to the point where all your data can be retrieved. To ensure safe recovery of your data, these experts work through the sterilized environment of Clean Rooms.
Rohit Mehra has 6 Years of Experience in the Software Technology field working as a freelancer with Stellar which offers Laptop Data Recovery, Laptop hard disk recovery and Data Recovery for more than 10 years.
Article Source: Hard Disk failure due to Ticking Sounds
In Microsoft Outlook, the Delegate access allows you to share Outlook resources, like appointment schedules, for enhanced coordination across various workgroups and throughout the organization. But in some situations, when you try to access the Delegate tab, it can not be accessed and you might come across some error messages. This problem could be due to some issues with Exchange Server mailbox. To handle this situation, you need to repair the Exchange Server database (EDB file) and extract mailboxes from it. For this purpose, you need to go for EDB Recovery solutions.
In a practical scenario, when you attempt to access Delegate tab in Microsoft Outlook email client, you might come across the below given error message:
“The Delegate page is not available. Unable to access Outlook folder.”
At this point, you can not access shared data from Exchange Server and come across data loss situations. At this point, you need to find out the cause of this problem and go for appropriate EDB Repair solution to gain access of your mission critical data.
Cause of this problem
You might encounter this error messages due to corruption to the Exchange Server mailbox. In mix mode organization of Exchange Server, this issue might take place because of an erroneous homeMTA attribute. When the problem is caused by the incorrect homeMTA attribute, you can not add new users from EGAL (Exchange Global Address List) to your personal distribution list.
Furthermore, if you’ve wrong value in Secretary Field, you encounter same error message. For instance, the following profile contains a wrong value for Secretary Attribute:
CN=UsernameADEL:8e945738-9e88-4dc8-991b-e8ce46799ca5, CN=Deleted Objects, DC=Comatose, DC=com
In above example, Secretary Attribute points a deleted object of domain.
Resolution
If the problem is due to homeMTA attribute, verify it and correct it. However, if mailbox corruption is causing this issue, go for EDB Recovery solutions to repair and restore data from corrupted EDB file.
Recovery is best possible with the help of powerful and effective third party applications, known as EDB Repair software. These tools use adequate algorithms to methodically scan damaged Exchange Server database and retrieve all of its inaccessible objects such as emails, notes, contact, tasks and so forth. With self-descriptive and interactive user interface, these tools are completely easy to use.
Stellar Phoenix Mailbox Exchange Recovery is the most excellent solution to handle majority of EDB corruption circumstances. It works well with Exchange Server 2003, 2000 and 5.5. This software is compatible with Windows 2003, XP and 2000. Due to read-only and non-destructive design, this software is completely safe to use.
Axel Culver has passion for writing Technical article. He is right now writing articles related to Product like EDB Recovery Software and EDB Repair Software. He is also a professional writer and has written many blogs, article, press releasing and content for many websites.
Article Source: Resolving “The Delegate page is not available” Exchange Server Error
Integrated into a disk drive, a disk controller is a circuit, which is built onto the motherboard. It enables the CPU to communicate with the hard disk. At times, when the hard disk controller fails, you may not be able to access the saved data and encounter a few error messages. This may result in data loss. In such cases, a valid data backup can provide you with great support to restore your data. But, if you have not maintained any backup or the backup fails to restore the data, then the need of Data Recovery arises.
For instance – while formatting the hard drive during re-installation of the operating system, you encounter any one of the following error messages:
01H which describes ‘Bad Command’
04H which describes ‘Request Sector Not found’
20H which describes ‘Controller Has Failed’
FFH which describes ‘Sense Operation Failed’
80H which describes ‘Drive Failed to Respond’
10H which describes ‘Bad EEC on Disk Read’
CCH which describes ‘Write Fault’
When you encounter any one of the above error message, the data stored in your hard drive becomes inaccessible
Cause:
The main cause of the above error messages are:
Hard drive controller failure.
Hardware failure.
Resolution:
To resolve these issues, try to perform a clean re-install of the operating system. When you re-install the operating system, if the process continues without any error then you can use a data recovery software to recover data from the formatted hard drive.
However, if the problem persists, then you need to seek help from a reputed Data Recovery company. These companies provide professional Hard Drive Recovery Services to recover your lost data from physically damaged hard drive. These companies employ the experience of highly qualified technicians to provide you with accurate and comprehensive Data Recovery Services. These technicians apply intense methods to powerfully extract the data from the damaged hard drive.
Stellar Information Systems Limited is a renowned organization that caters the best Data Recovery Services across the world. Stellar provides Hard Drive Recovery Services under the safe environment of Class 100 Clean Rooms. The hard drive recovery experts at Stellar are well qualified and work through the best procedures to ensure complete and systematic recovery of your lost data. With over 16 years of valuable experience, Stellar offers complete Data Recovery in all cases of damages and failure of hard drives, like SATA, IDE (PATA) or SCSI.
Rohit Mehra has 6 Years of Experience in the Software Technology field working as a freelancer with Stellar which offers Laptop Data Recovery, Laptop hard disk recovery and Data Recovery for more than 10 years.
Article Source: Dealing with Hard Disk Controller Failure
In this era of technological advancement, digital cameras have emerged as an off shoot. Digital cameras are used to capture and store pictures on a removable media called ‘Media Card’. These media cards offer power-free storage and rugged environment specifications. At times, you may often observe inaccessibility of your pictures stored in the memory card. This happens because of corruption in the memory card, which occurs due to numerous reasons, such as read write error, virus infection, etc. In such situations, you require a recent and valid backup to restore your lost pictures. In case, you have not maintained the backup or the backup is incomplete, then you will need to use a powerful Digital Photo Recovery Software to recover your lost pictures.
Suppose, you store some pictures in the memory card of your digital camera. When you try to view the pictures, you encounter any one of the error messages similar to the following:
“Memory card error”
“Memory card not usable”
“Card is not formatted”
When you come across any of these error messages, the data stored in the memory card becomes inaccessible. In addition, you get the same error message repeatedly each time you try to view the pictures.
Cause:
The root cause of the above issue is corruption in the memory card. Being a mechanical device, memory card is vulnerable to corruption. If the level of corruption is high, then you may loose your pictures forever. However, the following measures can help you to prevent your pictures from getting lost:
Try to maintain backup for your pictures.
Always keep the camera’s battery charged.
Switch off/ on your camera systematically.
In case you observe any corruption in the memory card, stop using the camera as it may lead to further corruption of previously stored photos.
But, in case your memory card gets corrupted, then you need to format your memory card. But, formatting erases all the previously stored data from the memory card. In such cases, it is recommended to use an effective Digital Photo Recovery Software for absolute recovery of your lost pictures. The Photo Recovery application employ powerful scanning algorithms to recover your data quickly and completely.
Stellar Phoenix Photo Recovery is an outstanding software that fully recovers your lost pictures from almost all storage devices such as SD memory cards, MMC memory cards, CF memory cards, etc. This Photo Recovery utility provides rich graphical user interface that makes it easy to use and understand. . The read-only application is available for both Windows (Vista, XP, 2003, 2000 and NT) and Apple Mac (Mac OS X 10.5 Leopard, 10.4 Tiger and 10.3.9 Panther) operating systems.
Shaun Pattrik has 6 Years of Experience in the Software Technology researching with Stellar Info. System Ltd which offers Photo Recovery, photo recovery software, digital photo recovery and Mac photo recovery.
Article Source: How to Recover lost Digital Pictures
A Windows Vista computer might start exhibiting unexpected behavior when it encounters irrecoverable system state. This might occur both due to software and hardware errors. You might experience system shutting down or restarting while normal operations. At times, you might also come across blue screen error messages describing the cause of the issue. If system repair utilities fail to repair such a corrupted installation, you might need to perform clean reinstallation of Windows operating system that causes data loss. To deal with the situation, you will either need to use your last taken backup or scan the drive using an efficient Data Recovery Software.
To illustrate the scenario, consider that you use a Windows Vista based computer. You might receive any of the BSOD error message, as below:
“ Windows has recovered from a serious error or an unexpected shutdown”
Or
“Windows has been shut down to prevent damage to your computer”
Such errors also prompt you to check for problem solutions.
Cause
A software issue has made the Windows Vista installation unstable.
Solution
To get the system back to a stable state, try the following suggestions:
Windows can find problem solutions that can be checked through ‘Problem Reports and Solutions’ section of Control Panel
Check and install the latest updates available for Windows Vista
Install the updated version of hardware drivers
Try to use ‘Startup Repair’ recovery tool to fix startup issues due to damaged or missing system files
Use ‘System Restore’ to get the system to last working state
If the same issues persist, you might need to remove the damaged Windows Vista installation and install the new one. Use your backup to restore the data thus lost
You might need to use a powerful Data Recovery utility if you face any concerns that prevent you to restore from backup. Disk Recovery Software are commercial tools exclusively designed for scanning a logically crashed drive to locate and safely restore lost files and folders. These are efficient Partition Recovery products providing you graphically rich user interface and impressive set of features.
Stellar Phoenix Windows Data Recovery is a comprehensive recovery utility that salvages lost data for Windows 7 RC1, Vista, XP, 2003 and 2000 based systems. It is a reliable Data Recovery tool that provides advanced options, like File Filter, Append Header, RAW File Recovery and others. It supports FAT32, VFAT, NTFS and NTFS5 file systems.
Kmadhav is data recovery expert and doing research on disk recovery software ,Partition Recovery
Article Source: How to Solve Issues when Windows Vista Restarts or Shuts Down Unexpectedly
If you have permissions to access your someone else’s Outlook PST file and open personal Outlook folders, respond to the request, create items and any other operation, Microsoft Outlook allows you to add another person’s mailbox in Outlook folder list. It allows you to quickly access another Outlook PST file and use it as required. But in some situations, when you try to access additional PST file, you might come across a number of error messages, which indicate PST file corruption and prevent you to access PST file items. This behavior of Microsoft Outlook renders all of your mission critical data inaccessible and cause serious data loss situations. At this point, to gain access of your significant data, you are required to go for PST Recovery solutions using appropriate tools.
In a practical scenario, when you attempt to add another mailbox to Outlook or try to access previously added PST file from the Outlook Folders list by double clicking it, the operation may not complete successfully and the file can not be accessed. In Microsoft Outlook 2002 or Microsoft Outlook 2000, when you try to access a shared folder like Contacts, you might come across below error message:
“Unable to expand the folder. The set of folders could not be opened.”
In Microsoft Office Outlook 2003, following error message may occur when you perform above operation of accessing additional PST file:
“Unable to expand the folder. Microsoft Office Outlook could not access the specified folder location.”
This problem occurs even if yo have given proper access privileges to the PST folder, which you want to share.
In such circumstances, the additional PST file become inaccessible. In some cases, the same situations might occur with your mail PST file and you face serious data loss issues. In order to sort out this issue, you need to find out the cause of this problem and then go for PST File Recovery by sorting out this issue.
Root of this problem
There are two possible causes of this problem:
1.You haven’t set the “Folder Visible” option for additional MS Outlook PST file.
2.The PST files of MS Outlook are corrupted and thus Outlook can not recognize them. Corruption could occur due to application faults, virus contamination, operating system errors, improper system shutdown and other such issues.
3.
Nevertheless the cause of this problem, the ultimate result would be loss of your business critical emails, notes, contacts, tasks, calendar items, journal items and appointments and then you need to go for PST recovery to sort out this problem as quickly as possible.
Resolution
There are following two possible situations to sort out this problem, depending upon the cause of the issue:
1-If the problem is due to “Folder Visible” option, turn it on for the PST file, which contains folders that you wish to share or access. To do so, go through underwritten steps:
-On Windows system, which contains additional mailbox with folders that you like to share, right-click on the additional PST file and then click Properties on shortcut menu.
-In the Permissions tab, select the Folder Visible option by clicking the check box in Permissions are.
-Click OK button.
2-In the else case, if problem is due to corruption to the Outlook PST file, you need to repair and restore the PST file. For this purpose, Microsoft Outlook provides an inbuilt took, known as Inbox Repair Tool or Scanpst.exe. This tools can perform PST File Recovery in a number of situations, where the PST file get damaged due to some internal reasons such as application conflict, file header errors, missing application files and other such issues.
Although, Inbox Repair Tool is quite helpful in resolving PST corruption problems, but in case it fails to handle the corruption, you need to opt for PST Recovery Software to fix the problem.
The PST Recovery Software are powerful and effective third party applications, which carry out thorough scan of damaged PST file and retrieve all of its inaccessible or corrupt objects. These software do not demand sound technical skills as they come equipped with interactive and simple graphical user interface. With read-only and non-destructive conduct, these tools are completely safe to use.
Author have more than 6 Year of Experience in Computer field, member of Internet Marketing Society, has Specializing in Pst Recovery Software. For More Information visit http://www.repair-outlook-pst.com
Article Source: Pst Recovery – Rectifying “Unable to expand the folder” Error in Microsoft Outlook
Hard disk damage is an unexpected mishappening. As a computer owner, the biggest threat to your data stored in your system is hard drive damage. A hard disk failure occurs when a hard drive malfunctions due to both logical and physical failures. It may happen in the course of normal operation due to any internal or external factor, which makes the hard drive data inaccessible. In such cases, it is suggested to use a valid backup to restore your lost data. In any case, if you have no valid backup, then the only way by which your data can be retrieved and recovered is through Hard Drive Recovery Services.
Following are the symptoms of a hard disk failure:
1.When the system is switched on, the hard disk is unrecognizable .
2.When the hard disk does not appear in ‘My Computer’ or ‘Windows Explorer’.
3.When the system becomes slow and takes long time to access a file.
4.When the system hangs or displays bluescreen.
For instance – you may encounter the below error message at the startup or while using your system:
“Seek Error – Sector not found”
When the above error message appears on your system, the data stored on the hard drive becomes inaccessible.
Cause:
The main causes for the above error messages are:
1.Damaged data on the hard drive.
2.Physical damage of the hard disk.
Resolution:
Run ScanDisk to test the hard disk. To run ScanDisk, take the following steps:
1.Go to ‘System tools’ in the start menu and click ScanDisk.
2.Select the drive that you want to check for errors.
3.After that, click Thorough and then click Start.
When you run the Scan Disk command with Thorough option selected, it examines and checks for physical damage on the hard drive. It gives you the option of saving or discarding of damaged data, if detected. In case of large hard disk, Scan Disk surface scan may take a lot of time to perform its desired task..
After following the above steps if the problem persists as before, then you need to seek help from a reputed Data Recovery company to extract your inaccessible data from the damaged hard drive. These companies incorporate the experience of highly talented Data Recovery experts to ensure complete retrieval of your lost data.
Rohit Mehra is a webmaster of http://www.stellarinfo.co.in which gives you the Secure Hard Disk Recovery that you need.
Article Source: Tips To Resolve “Seek Error – Sector not found”
File Replication Service is a multiple-master replication, multithreaded engine included in Microsoft Windows Server versions. Abbreviated as FRS, this service is used by Windows 2000 server to replicate logon scripts and system policies for Windows 2000 based and other servers. When FRS performs any I/O operation on the disk, it maintains the data in cache in order to increase the performance. If operated on an NTFS volume, this cached FRS data might get lost under highly stressed conditions, which might leave the disk in inconsistent state. One of the solutions to resolve disk inconsistency is to reformat the disk. If you do so, you lose all the data that is stored on the disk. To recover this data, use your recent backup or if no valid backup is available, scan the disk using a powerful third-party Data Recovery utility.
To illustrate this, consider that FRS performs an I/O operation on a Windows 2000 based system. If the I/O is stressful and is being performed on a volume that is formatted to NTFS file system, you might come across the below error message:
“Event ID 41.
The file system structure on the disk is corrupt and unusable. Please run the Chkdsk utility on the volume “Name.”
Further, when you run Chkdsk to check the consistency of the disk, you receive one of the below error messages:
“Deleting corrupt attribute record (16, “”) from file record segment xxx.”
Or
“Correcting error in index $30 for file 100”
Windows 2000 system error log records this entry for dirty volume with event ID 55.
Cause
A Windows 2000 based system exhibits the above discussed behavior if some of the cached has not been successfully written to the disk. This particularly occurs under stressful I/O operations. This leaves the disk in corrupt state.
Solution
You are suggested to install the latest updates available for your operating system. However, to solve disk inconsistency, you need to reformat the disk and use your backup to restore data thus lost.
At times, backup fails to give the desired results. In such cases, you are recommended to use hard drive recovery software to extract the lost data. Data Recovery applications are highly influential and powerful utilities designed to perform safe data recovery using suitable scanning algorithms. These applications serve as valid Partition Recovery tools as well.
Stellar Phoenix Windows Data Recovery is a comprehensive Data Recovery Software designed for Windows 7 RC1, Vista, XP, 2003 and 2000. This application is competent to recover data in all cases and provides advanced options. It is a safe utility that is compatible with FAT32, VFAT, NTFS and NTFS5 drives.
K madhav is a data recovery expert and doing research on data recovery software and hard drive recovery
Article Source: Loss of Cached FRS Data Corrupts Disk
Index is the most critical component of a relational database. It ensures easy, quick and managed accessing of data from the database. In Microsoft SQL Server, a non-clustered index is an index that stores both logical and physical order of indexes and tables. But in case of corruption if the logical order of index doesn’t match the physical order or rows on hard drive and thus you can not access data from the database. This situation generally occurs due to index corruption, which could be the outcome of self-update query, virus infection, improper system shutdown and may others. At this point, the database become inaccessible and you encounter data loss situations. To retrieve data in such cases, you are required to go for SQL Recovery using appropriate tools.
In a practical scenario, when you carry out any operation using self-update query on master table after which non-clustered index gets damaged or corrupted. Additionally, you encounter any of the below given error messages while trying to access any database table or entire database:
“Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database ‘badqueue’, index ‘repro.NC’ (ID 1828201563) (index ID 2). Extra or invalid key for the keys:”
Or
“Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:308:2) with values (i2 = 369 and i1 = 1 and ? = 61) points to the data row identified by ().”
After above error message occurs, you can not access master table and thus stored data and require SQL Repair. The self-update query select over 3,000 rows of master table but not entire master table. To gain access of master table, you are recommended to download and use hotfix solution offered by Microsoft.
But even after applying the hotfix, you get same error message and can not access the database, you are required to repair and restore damaged database. This is best possible with the help of powerful and efficient third party applications, known as SQL Recovery tools.
These applications use high-end scanning mechanisms to methodically scan entire SQL Server database and retrieve all of its objects including tables, reports, forms, triggers, stored procedures and so forth. With interactive and rich graphical interface, they are quite easy to use. The SQL Repair software do not alter original data in the database.
Stellar Phoenix SQL Recovery is the most excellent solution for SQL Database corruption issues. This read only repair application supports recovery from the MDF files of Microsoft SQL Server 2008, 2005 and 2000. This software is compatible with Microsoft Windows Vista, 2003, XP, 2000 and NT.
Colin Dolly is a self employed Internet entrepreneur and product reviewer. This Recover SQL utility is extremely useful when the database gets corrupted due to internal program errors, hardware malfunctioning, accidental deletion of data and more. This SQL recovery software recovers all types of database components including triggers, tables, stored procedures and more.MS SQL Recovery
Article Source: Index Corruption in MS SQL Server Might Damage the Database
iPod is a high technology portable digital media player designed and marketed by Apple Inc. It is used for playing and storing all kinds of music files and it also serves as an external data storage device.
Sometimes, you may come across a sad iPod icon on the iPod screen, due to which the data in your iPod becomes inaccessible. In such cases, you can use an updated backup to restore your lost data. But if the backup is not available or it fails to restore the data, then you will need to use an advanced iPod Recovery Software to recover your lost data systematically.
When the sad icon appears on the iPod screen, you encounter the following error messages:
“iPod does not get recognized in Finder (Mac OS X) or iPod does not get recognized in My Computer (Windows)”
“iPod does not get recognized in iTunes”
After the occurrence of the above error messages, the data stored in the memory card of the iPod becomes inaccessible. Furthermore, you receive the same error message each time you attempt to access the files.
Cause:
The prominent cause of the above error message is corruption in the file system, which does not allow you to open or access the stored files.
Resolution:
To resolve the above error message, you need to take the following steps:
Update your iPod with the latest iPod software.
Charge the iPod battery.
Make sure that the ‘Hold’ button is off.
Restore your iPod to its factory settings.
When you restore your iPod to factory settings, all the data stored in the iPod disk gets deleted. So, before restoring your iPod to factory settings, make sure you have a valid backup for your iPod data. But in case of unavailability of backup, it is recommended to use a powerful iPod Recovery Software to recover and restore your lost data accurately. These iPod Recovery applications employ highly effective scanning algorithms to recover your data quickly and safely.
Stellar Phoenix iPod Recovery is the best utility available that ensures complete recovery of your lost, missing or inaccessible iPod data. This iPod data recovery application is embedded with rich graphical user interface, making it user friendly and self explanatory, so that anyone can use it without any prior technical understanding. This read only software supports iPod Classic, iPod Mini, iPod Shuffle and iPod Nano. This software is available for both Windows and Mac operating systems.
Simpson is expert in data recovery software field working as a freelancer with Stellar which offers data recovery services including ipod data recovery , image recovery software and sun solaris data recovery software .
Article Source: How to Resolve Sad Icon in iPod
The highly compact 2.1 mega pixel Kodak Easyshare LS420 is a stylish digital camera that captures exceptional quality pictures. The photos clicked by the camera are stored on a Secure Digital (SD) or MultiMedia (MMC) memory card. At times, when you attempt to view the pictures saved on the memory card, you receive an error message. This error message primarily occurs due to file system damage, virus infection, or accidentally switching off the camera. An ideal way to overcome such situation is restoration of pictures from an updated backup. However, in case of backup unavailability or backup falling short to restore the required photographs, you will need to use an effective Digital Photo Recovery.
For instance, when you try to view your pictures saved on the SD/MMC memory card in your Kodak Easyshare LS420 digital camera, you may encounter the following error message:
“Memory card requires formatting”
Or
“Internal memory cannot be read (Please format internal memory)”
The same error message appears each time you try to view the pictures.
Cause:
Below are some main reasons for the occurrence of the above error messages:
Use of encrypted memory card.
Incompatibility of memory card with Kodak Easyshare LS420 Digital Camera.
Locked memory card.
Corruption in internal memory of SD/MMC card.
Resolution:
Use the following methods to resolve the above error messages:
Ensure that the SD/MMC card is properly inserted in Kodak Easyshare LS420 Digital Camera.
Try to unlock the memory card if needed, else try using a different card.
Try to decrypt the encrypted data on SD/MMC card.
To repair the corruption on internal memory card, reformat it.
If you format the SD/MMC card, all the data stored in the memory card will be erased. In such situations, a valid and recent backup can provide you with great support to restore your data. However, if there is no backup available, then you will need to use a powerful Digital Photo Recovery Software to recover your lost pictures completely. Equipped with highly interactive user interface, these Photo Recovery tools use sophisticated scanning algorithms to quickly recover your lost files or pictures.
Stellar Phoenix Photo Recovery is an exceptional Photo Recovery application that ensures complete and orderly recovery of your lost digital data from all kinds of memory cards, digital cameras, etc. The non-destructive tool is available for Windows (Windows Vista, XP, 2003 and 2000) and Mac (Mac OS X 10.5.x Leopard, Mac OS X 10.4.x Tiger and 10.3.9 Panther).
Shaun Pattrik has 6 Years of Experience in the Software Technology researching with Stellar Info. System Ltd which offers photo recovery, photo recovery software, digital photo recovery and Mac photo recovery.
Article Source: Recovery of photos from Kodak Easyshare LS420 Digital Camera post loss
MS Exchange Server administrators on regular basis need to manage various Exchange database related errors. These error messages sometimes make the life of the administrators miserable. Especially in the situation when they come on the edge of data loss. The situation of data loss generally occurs when the Exchange Server database (EDB) file gets corrupt. The EDB file can be damaged due to reasons like improper server shut down, virus infection, physical damage of storage media, etc. When Exchange Server database file gets damaged, MS Outlook cannot access users’ emails, calendars, etc. from it, which make users tense. Moreover, the communication among the users gets stopped, which may also lead into projects delay because projects related information cannot be shared.
At that time, the biggest challenge for administrators is to restart communication as soon as possible. But, to restart communication, they need to rebuild the Exchange database, which may leads into data loss that organizations cannot tolerate. However, if the backup of the damaged Exchange database file has been maintained then data can be restored from it by creating a new Exchange database file. So, wise administrators always create backup of Exchange database file to tackle such situations. In case, if there is no backup for damaged Exchange database file then the only solution for restarting communication is Exchange recovery.
During the process of Exchange database recovery, the damaged Exchange database file is first repaired and then users’ mailboxes are recovered from it. However, performing Exchange database repairing and recovery is not child’s play. It requires expertise and significant amount of time. Moreover, manually recovering Exchange database is also a costly process and even after that there is no surety that the data will be recovered with full accuracy. Therefore, Exchange recovery tools are always preferred for this purpose.
Exchange recovery software accurately repairs the damaged EDB file in short span of time. Moreover, there is no need for any expertise because you just have to provide the file path and the software will do rest of the work. You can easily find a professional Exchange database recovery software in the market. But, while selecting Exchange recovery software, try to be tricky because selecting the best one from a large range of recovery software is not an easy task.
Author of the article is an. expertise in data recovery , email recovery, email migration, hard drive recovery, password recovery fields.
Article Source: Corrupt Exchange Database Recovery With Exchange Recovery Tool
As the owner of an Xbox 360, you have to always know how to fix e74 error. This is because you are more often than not to come across the e74 error while playing with the console.
It is because of all the features available in the Xbox 360 that it faces so many problems, and why you have to know how to fix e74 error. Usually, an error on the Xbox 360 is attributed to an audio or video fault. These faults usually arise due to a malfunction in the hardware of the gaming console.
In fact, when such a thing happens, you can actually see some red flashing on the lower right quarter of the console. In addition to this, you will also see quite a few error messages on the screen in various languages.
Don’t panic to learn how to fix e74 error
The red flashing on the screen is also referred to as the 1 red ring of death. Though this may sound really serious to the newcomer this is an error on the console that is very easy to repair. In fact, all you need is a bit of effort and time to learn how to fix e74 error. However many people tend to make the issue much more complicated by doing unnecessary things while repairing the problem.
However to learn how to fix e74 error, you have to first learn not to panic or do anything drastic in the situation. You may start worrying that as you don’t know how to fix e74 error, you will have to send the console to Microsoft, and wait for months before you will be able to use it again.
Save money repairing your Xbox 360 on your own
Moreover, by sending it to Microsoft for repairs, you will have to pay a few hundred dollars to repair even gaming consoles that are a few years old. This can prove to be a rather expensive option for you to use.
So to save money, and to be able to use your Xbox 360 in a few days’ time, you are sure to turn to the internet to learn how to fix e74 error. While looking for remedies, you are sure to find one where you have to wrap the console in a towel to repair it.
Don’t do this as this method is used only when you need to overheat your system, and thus force it into an automatic reset position. However most of the time, this trick does not help in treating the error as most of the time, just heating the console is not sufficient to repair this error.
Use cheap kits to repair the console
In fact, this technique can prove to be deteriorating to your gaming console. It will in no way help in fixing the unit; it can only lead to long term damage of the unit. So now you may be wondering how to fix e74 error.
The best way to fix it is by buying a cheap kit that shows you how to fix e74 error within an hour. These kits come with simple and straightforward instructions to fix the error. You will never fail, or get confused in doing this with the exact steps shown in the kit.
To learn about how to fix e 74 error make sure to download your copy of the Free Special Report
Article Source: Learn How to Fix E74 Error While Sitting at Home
Microsoft Outlook is a most popular and widely used personal information manager and email client from Microsoft Corporation. It is the part of Microsoft Office suit of products. You can also use Outlook in combination of Microsoft Exchange Server to create a messaging and collaborative environment. MS Outlook stores all of your critical emails, contacts, notes, schedules, journal and other data in PST (Personal Folder) file. In other words, you can say that PST is the repository of all Outlook data. This file has an limitation in Microsoft Outlook 2002 and earlier versions that it can not grow more than 2 GB. When it reaches 2 GB size, the performance gets decreased and you might encounter PST file corruption. At this point, you need to Split PST File using appropriate tools.
In a practical scenario, when you attempt to start Microsoft Outlook and attempt to open the PST file, you might come across below given error message:
“Errors have been detected in the file . Quit all mail-enabled applications, and then use the Inbox Repair Tool.”
This issue takes place when PST file exceeds the size limit of 2 GB. Whenever the PST file grows more than 2 GB, you would not be able to start Outlook and open PST file. You might not add new data to it. This issue is called oversized PST problem. However, it is suggested to use Inbox Repair tool or Scanpst.exe to correct this problem, but it does not work in such circumstances. When this problem occurs, you might face any of the following situations:
1-Slow performance of Microsoft Outlook, while creating, searching and moving items due to large number or large size of times in PST files.
2-Outlook crashes while working on it or you come across a number of error messages and PST file corruption scenarios.
Microsoft Outlook does not contain any inbuilt tool to recover from oversized PST problem and make the file accessible. However, Microsoft offers an external utility as a makeshift. This utility is known as pst2gb.exe. It can restore the PST file to a usable state. To use this tool for truncating PST file, go through below steps:
3-Download this tool from Microsoft Download Center.
4-Extract 2gb 152.exe file in an empty folder. See the following 5 files
-Msstdfmt.dll
-Msvbvm60.dll
-Pst2gb.exe
-Readme.rtf
-Readme.txt
5-Run pst2gb.exe tool, click Browse for choosing oversized PST file and click Open.
6-Click Create, choose name and the location of truncated PST file, which you like to create and click on Save button.
7-Type the amount of data, which you like to truncate in Personal Folder file. There isn’t a correct amount, which you use. You could get best result if you truncate 20 to 25 MB, but you might have to cut less or more.
8-Run Inbox Repair Tool on truncated file.
9-Open the resulted file in Microsoft Outlook.
10-If the truncated file does not open successfully in Microsoft Outlook, you need to go through the same process again from beginning.
Although, this tool might help you sort out your problem, but it is not safe in any case. When you use this utility, it creates a truncated copy of PST file. This copy does not contain all of your original data as the program cuts user defined amount of the data from selected PST file. It means some messages are missing or unavailable in recovered copy.
At this point, you need a tool, which can Split PST into different smaller files, without playing with the integrity of your data. This is best possible with the help of third party applications, which are known particularly designed to divide an oversized and unusable PST file into several files and make your precious data accessible again.
These applications are known as Split PST software. They split large sized PST file into several individual PST files, which could be used as individual file by simply importing them into Microsoft Outlook and creating a new Outlook profile or using it with same profile. These software Split PST File on a defined criteria either date or email address.
Stellar Phoenix PST File Splitter is the most influential and comprehensive tool to easily split oversized PST file and make it accessible through MS Outlook. It supports Microsoft Outlook 2007, 2003, 2002 and 2000. This software is compatible with Microsoft Windows Vista, 2003, XP, 2000 and NT4 (SP6).
Author have more than 6 Year of Experience in Computer field, member of Internet Marketing Society, has Specializing in Split Pst file or Repair Pst Software. For More Information visit http://www.split-pst-file.com/split-2gb-pst.php
Article Source: Why and How to Split Oversized PST file In Microsoft Outlook
Also known as Blue Screen of Death, STOP error messages occur when Windows encounters a serious problem. These STOP error messages literally stops booting process of Windows and makes the hard drive data inaccessible. In order to prevent data loss, you should always maintain an updated and valid backup to restore your data. However, if you have not created any backup file or the backup file itself gets corrupted, then only a powerful windows data recovery software is required to recover windows and also your lost, missing, and inaccessible data.
To illustrate this, consider a case where you receive the following error message during upgrade to Windows XP, or when you start Windows XP:
“STOP 0×000000ED (0xaaaaaaaa,0xbbbbbbbb,0xcccccccc,0xdddddddd)
UNMOUNTABLE_BOOT_VOLUME”
The above mentioned error message makes your system unbootable, and can further make the data stored in the hard drive inaccessible. In addition, you encounter the same STOP error message every time you attempt to start your Windows XP system.
Cause:
The above STOP error message can occur due to following reasons:
Kernel mode I/O subsystem attempt to mount the boot volume.
Incompatible software or hardware resources.
Resolution:
To resolve the above STOP error message and access the data stored in your hard drive, following steps need to be taken:
Try repairing the volume by using chkdsk / r command.
Check the cable and load Fail-Safe settings.
Use Microsoft Support Services.
The above resolutions enable you to resolve the issue in most of the situations. But if in case the problem persists, you will need to reinstall Windows XP. A clean reinstall of Windows XP erases all the data saved in the hard drive partition. To recover data from formatted hard drive partition, you will need to to use an advanced windows partition recovery application. Such windows data recovery tools use fast scanning algorithms to quickly scan your hard drive, and provide effective recovery of your missing data. The high graphical user interface of these tools makes them easy to use and understand.
Stellar phoenix windows data recovery v4.1 is an outstanding utility to recover windows files that ensures safe, secure, and accurate recovery of your lost data from FAT32, VFAT, NTFS, and NTFS5 file systems based volumes. The read only application also provides you with various advanced features like, Disk Imaging, Disk Cloning, Drive Status, and more. This software supports Windows 7 RC1, Vista, XP, 2003, and 2000.
Robin Watson is B-Tech student and is doing research on how to perform windows recovery with the help of data recovery software .
Article Source: Resolving Unmountable Boot Volume Error Message
Also known as Blue Screen of Death, STOP error messages occur when Windows encounters a serious problem. These STOP error messages literally stops booting process of Windows and makes the hard drive data inaccessible. In order to prevent data loss, you should always maintain an updated and valid backup to restore your data. However, if you have not created any backup file or the backup file itself gets corrupted, then only a powerful Windows Data Recovery Software will ensure complete recovery of your lost, missing, and inaccessible data.
To illustrate this, consider a case where you receive the following error message during upgrade to Windows XP, or when you start Windows XP:
“STOP 0×000000ED (0xaaaaaaaa,0xbbbbbbbb,0xcccccccc,0xdddddddd)
UNMOUNTABLE_BOOT_VOLUME”
The above mentioned error message makes your system unbootable, and can further make the data stored in the hard drive inaccessible. In addition, you encounter the same STOP error message every time you attempt to start your Windows XP system.
Cause:
The above STOP error message can occur due to following reasons:
Kernel mode I/O subsystem attempt to mount the boot volume.
Incompatible software or hardware resources.
Resolution:
To resolve the above STOP error message and access the data stored in your hard drive, following steps need to be taken:
Try repairing the volume by using chkdsk / r command.
Check the cable and load Fail-Safe settings.
Use Microsoft Support Services.
The above resolutions enable you to resolve the issue in most of the situations. But if in case the problem persists, you will need to reinstall Windows XP. A clean reinstall of Windows XP erases all the data saved in the hard drive partition. To recover data from formatted hard drive partition, you will need to to use an advanced Windows Partition Recovery application. Such Windows Data Recovery tools use fast scanning algorithms to quickly scan your hard drive, and provide effective recovery of your missing data. The high graphical user interface of these tools makes them easy to use and understand.
Stellar Phoenix Windows Data Recovery v4.1 is an outstanding Windows Data Recovery utility that ensures safe, secure, and accurate recovery of your lost data from FAT32, VFAT, NTFS, and NTFS5 file systems based volumes. The read only application also provides you with various advanced features like, Disk Imaging, Disk Cloning, Drive Status, and more. This software supports Windows 7 RC1, Vista, XP, 2003, and 2000.
Author is researching on the windows related problems and explains the Unmountable Boot Volume Error that cause data loss situations. Author has given solution to recover windows and has used a recovery software that can recover windows file from system.
Article Source: Resolving Unmountable Boot Volume Error Message
Hard drive is considered to be a reliable storage media that stores your operating system, applications, documents and other data. To check its consistency and other connected hardware, a test is performed called POST (Power-On-Self-Test) as you turn on the computer system by BIOS.BIOS proceeds to next step of booting only when POST is successful. In case, if hard drive is faulty and is unable to start properly, POST halts the process of booting and you fail to access the stored information. You might interpret such events by few error messages that appear on screen while the process. Hard Drive Recovery is the solution to recover lost data from physically crashed hard drive, especially when there is no valid data backup available.
To illustrate this, consider that you attempt to boot your computer and its fails while the POST is running. In addition, you receive the below error message: “Fixed disk general POST error”
Cause
By ‘fixed disk’ the error refers to the hard drive, on which the POST test has failed due to hardware reasons. Among various reasons responsible for hard drive failure, some of them are as below:
Read/write head failure: This is the most common reason that causes hard drive crash. Usually, the head floats at few micro meter distance from disk surface, but produces clicking sounds if gets crashed. Hard drive fails to access any data while it is damaged. Motor failure: If the hard drive motor, that actually spins the hard drive platters fails, it causes platters to stop spinning and thus operate anymore. Electronic reasons: If the electronic controller board stops functioning due to electric surges and power spikes, the hard drive fails to get power and fails. Part deterioration: Hard drive fails if any of the internal physical component deteriorates.
Solution
Such POST errors should be dealt by following these steps:
Remove the damaged hard drive from system Install a new hard drive Restore data from backup or consult Hard Drive Data Recovery technicians to recover data. Hard Drive Recovery service is provided by different companies that are equipped with suitable recovery tools, experienced technicians and most importantly, Clean Rooms.
Stellar Information Systems Limited offers industry’s best Hard Drive Data Recovery service. It is offered through Class 100 Clean Rooms. Experts of Stellar can successfully recover lost data in all cases of failure, be it mechanical or electronic. The service is available for all hard disk interfaces including SATA, PATA and SCSI. Stellar has a rich experience of more than 16 years in the field.
Author is researching on the hard drive related problems and explains the situations that can cause data loss .Author has given solution of hard drive recovery and suggested to use hard drive recovery softwarefor lost data recovery.
Article Source: How to Fix Hard Drive POST Error?