Posts Tagged ‘device driver’
October 26th, 2009 | 
Author: Booting process includes various procedures that the operating system undergoes to perform all system checks and load the necessary files to enable proper functioning of the computer system. At times, the operating system fails to boot because of corruption in any of the files needed for boot up. This corruption can be caused by various reasons like improper system shutdown, virus infection, file system crash, etc. In such situations, the system becomes unbootable and the data stored in the hard drive becomes inaccessible. An ideal way to overcome such situations, is to restore the data from an updated backup. However,if the backup is not available, then it is recommended to use a good quality Windows Data Recovery Software to recover your lost data completely.
Sometimes, when you start your Windows based system, it fails to boot and displays either a blank screen or error messages similar to the following:
NTLDR is missing.
Invalid partition table.
Disk read error has occurred.
Windows could not start because the File X is missing or corrupt.
Operating system not found .
Missing or corrupted system files.
Software or device driver conflict.
Cause:
Following are the main reasons that can lead o boot up errors.
Improper changes made in BIOS.
Corrupted or failed hardware peripherals.
Corrupted system files, software or registry.
Missing, corrupted or incompatible device drivers.
Error in partition table, boot sector or Master boot record.
Resolution:
There can be various possible methods to resolve this issue, but the easiest method is to restore your system to Last Known Good Configuration by entering BIOS.
In case, you fail to resolve this issue by using the above method, then your operating system may get corrupt. In this scenario, you will need to re-install the operating system. When you perform a clean re-install of the operating system, all the previously stored data gets deleted. In this case, you need to use an effective Windows Data Recovery Software to recover and restore your lost data completely. These Windows Data Recovery tools employ powerful scanning algorithms to ensure quick and accurate recovery of your data. These Windows Partition Recovery applications provide highly enriched graphical user-interface that makes them user-friendly and self-explanatory.
Stellar Phoenix Windows Data Recovery v4.1 is an outstanding software recovers your lost, missing or inaccessible data comprehensively after almost all data loss scenarios. The Windows Data Recovery application is fully competent enough to recover data from FAT32, VFAT, NTFS, and NTFS5 based file systems. The read-only software is compatible with Windows7 RCI, Vista, XP, 2003, and 2000 operating systems.
Robin Watson is B-Tech student and is doing research on how to recover windows files with the help of data recovery software .
Article Source: Some Useful Tips to Resolve Windows Boot Up Errors
STOP error message generally occurs when Microsoft Windows encounter a problem which can cause the system to shut down to prevent damage. Due to the STOP error message, the system becomes unbootable, which makes the data stored in the hard drive inaccessible. In order to retrieve and restore the lost data , you need to maintain a valid backup file. In case of non-availability of backup file, an effective Windows Data Recovery Software will provide you with complete recovery of your lost, missing or deleted data.
For instance- you may get the below error message when you restart your Windows based system
“Stop: 0×00000072 (parameter1, parameter2, parameter3, parameter4) ASSIGN_DRIVES_LETTERS_FAILED”
After the occurrence of the above error message, the hard drive data becomes inaccessible. Additionally, the above STOP error message will prompt repeatedly , each time you attempt to boot your system.
Reason of this behavior:
There are 2 main causes of the above error message:
Incompatible Device driver.
Drive letter assignment failed.
Lets Solve the Issue :
To resolve the above Stop error message, you need to follow the steps given below:
Remove the additional hardware and reboot the system.
Try increasing the RAM (Random Access Memory) and disk space of the system.
Make sure the hardware and the drivers are compatible with the Windows by using Microsoft Hardware Compatibility List (HCL).
In most cases, you will be able to resolve the issues regarding the STOP :0×00000072” error message . In case the problem persists, then using the Emergency Repair Disk will prove handy. If the repair disk is unavailable, then a clean re-installation of the operating system is recommended. A clean re-installation of the operating system will erase all the data from selected hard disk partition. Thus, before performing a clean re-installation, make sure you have a valid backup for your data.
But, if you do not have a backup file and the data gets lost, then Windows Data Recovery utilities will powerfully extract and restore the lost data from the hard drive.. The Windows Partition Recovery applications are specifically designed to recover lost, deleted or missing data from the hard drive. These Windows Data Recovery applications employ highly enriched graphical user interface, that makes them user friendly.
Stellar Phoenix Windows Data Recovery v4.1 is a phenomenal Windows Data Recovery Software that systematically recovers lost or missing data from the hard drive.The non-destructive tool natively supports Windows 7 RC1, Vista, XP, 2003 and 2000. This software is compatible with FAT32, VFAT, NTFS, and NTFS5 file systems.
Robin Watson is B-Tech student and is doing research on how to perform windows recovery with the help of data recovery software .
Article Source: How to solve “Stop: 0×00000072” Error message using Windows Data Recovery Software
If you recently purchased a new computer and are having trouble printing documents to the Canon printer, the printer or simply is not recognized by your computer, then it is likely to experience an out of date or damaged Canon printer driver. Usually, a simple uninstall and reinstall the software that came with your printer should rectify the problem. Sometimes, after she loses the disks without the need for years or our new machine technology has surpassed the printer and simply needs to be cooled through an updated driver.
Canon printer drivers are like any other device driver. They are a group of files that allow the hardware or frills, in this case the printer, to interact with the inner workings of your computer. In a sense, a driver of a translator for your PC. Without an upgraded driver for your Canon printer just will not work for computer repair you will need upgraded driver. It can also cause other problems with your PC too. Each time you press the print button and receive an error message is logged in the Windows registry. Overtime, these error logs to build and make your computer run slow, for applications to hang, and even for the computer to hang. An accident is never a good sign.
The only way to solve this problem is to update the drivers for Canon printer support. You can choose to do so manually through your machine. However, if you surf the Internet using Mozilla Firefox, you cannot download the updated driver directly through the Canon website, since they are not compatible with this browser. Even if you are using a browser accepted into the Canon website, you will spend much time matching system specifications, download, unzip and install. Even then, you cannot be completely sure whether the problem is the Canon printer driver or one from another device to interfere with it. Updating a driver in perfect condition can cause many problems. It’s a vicious circle.
Would not it be nice to just be able to wave a magic wand and zap all your problems with Canon printer drivers are resolved? Well, look no further update driver software. Instead of a touch of a wand, with this software, you need only one click of your mouse. After a quick scan with this software, you can see the drivers on your computer are out of date and are the likely culprits of your computer problems. You can then choose what you upgrade and what to leave alone. What will take hours to do by hand, you can do in minutes with the software driver update.
I am a computer support specialist for iYogi, a leading IT support company Headquartered in India, iYogi provides computer support, antivirus security , via phone and remote access for home and small business users globally.
Article Source: Canon Printer Drivers – How to Get Canon Drivers Quickly and Easily
If you are a Pc user, then you should acknowledge that it is very great for you to update your operating system device drivers at standard intervals. The fact stays that although the Operating systems are fully functioning at the time of their launch but they demand strict plucking every now and then to stay up to date. As the technology around us transfers all the time, the operating system of our computing device must contain our arising demands. There are regular Windows XP update drivers that are issued on a nightly basis in order to hold new hardware. The computer hardware market witnesses the launch of new computer hardware every now and then.
Drivers are what help the computing machine reckon out what to make with every piece of hardware installed. They interface with the devices and your computer so that each piece of device (mouse, picture card, keyboard, sound card, monitor, printer, modem, etc) will serve perfectly.
At Present, we also recognize that Microsoft is always advancing their products, but this does not mean you realize to support purchasing the up-to-date release. What you can do though is take an upgrade for the Windows XP driver of your devices.
It may be really clouded to acquire the correct driver you want, so here’s where you want automatic device driver update software. This will make all the updating of all the device drivers of all your devices in the blink of an eye.
Windows XP was plunged quite a few days back when it did not second numerous of the present day computer hardware, but step by step the Windows XP update drivers were released and it started encouraging these computer hardware as well.
Speculate you have just purchased the trendy gaming card in the market, you should virtually sure enough hold the passable Windows XP update drivers in order to utilise the full potential of your
Fixing Windows XP Driver Updates is More Soothing Than You Recollect!
CPU. Without correct drivers the hardware goes futile. Seek to update your drivers as often as doable, as the new drivers are manufactured to add larger compatibility. If you have a proprietary computer hardware maker then watch to see whether your device is dependent before downloading the Windows XP update drivers. Make sure you support the automated updates feature on; this will help your PC to download the device drivers whenever it requires them. There are great fixes and patches accessible on a day-by-day basis, so remain informed.
Times have transformed, and nowadays you can easily spare yourself hundreds of dollars because you can arrange it on your own! You don’t even bear to be a genius, you just require a sensation software, or at the very least, a positive one.
At present, there is some software package product you can debate Driver Robot. This software is will run down your computing device to determine what you have installed, then control the upgrades for you automatically. I have found Driver Robot to be a bit more ingratiating, because it has a bigger database of drivers.
I’m am the author of Driver Software Review. For more information on how to update your Windows XP Update Drivers please visit Windows XP Update Drivers.
Article Source: Gaining Windows XP Driver Updates is More Visible Than You Imagine!
If you are a Pc user, then you should acknowledge that it is really all-important for you to update your operating system device drivers at average intervals. The fact remains that although the Operating systems are to the full operational at the time of their launch but they need constant tweaking every now and then to remain up to date. As the technology around us varies all the time, the operating system of our computing device must take our growing demands. There are popular Windows XP update drivers that are ejected on a hourly basis in order to sustain new computer hardware. The hardware market hears the launch of new hardware every now and then.
Device Drivers are what help the computing device shape out what to represent with each bit of computer hardware installed. They interface with the devices and your computing machine so that each piece of device (mouse, video card, keyboard, sound card, monitor, printing machine, modem, etc) will serve perfectly.
Nowadays, we also experience that Microsoft is always elevating their products, but this does not mean you realize to proceed buying the modern release. What you can do though is produce an upgrade for the Windows XP driver of your devices.
It may be very clouded to ensure the accurate driver you call for, so here’s where you require automatic device driver update software. This will make all the updating of all the drivers of all your devices in the flash of an eye.
Windows XP was launched quite a few ages back when it did not sustain many of the present day hardware, but step by step the Windows XP update drivers were published and it began enduring these hardware as well.
Suppose you have just purchased the up-to-date gaming card in the marketplace, you should most surely have the right Windows XP update drivers in order to use the full potential of your
Amazing Windows XP Driver Updates is More Acquirable Than You Believe!
CPU. Without proper drivers the hardware becomes useless. Try to update your drivers as frequently as doable, as the new device drivers are invented to bring better compatibility. If you hold a proprietary hardware manufacturer then check to see whether your device is dependent before downloading the Windows XP update drivers. Make sure you go along the automatic updates feature on; this will help your PC to download the drivers whenever it necessitates them. There are complete fixes and patches open on a day-by-day basis, so remain informed.
Times have changed, and now you can easily spare yourself hundreds of dollars because you can arrange it on your own! You don’t even have to be a mastermind, you just require a mastermind computer software, or at the very least, a serious one.
At present, there is one software program product you can consider Driver Robot. This software is will run down your computing machine to control what you have set up, then detect the upgrades for you automatically. I have found Driver Robot to be a bit more ingratiating, because it has a big database of device drivers.
I’m am the author of Driver Software Review. For more information on how to update your Windows XP Update Drivers please visit Windows XP Update Drivers.
Article Source: Getting Windows XP Driver Updates is More User-friendly Than You Reckon!
If you are a Pc user, then you should recognize that it is really all-important for you to update your operating system drivers at regular intervals. The fact stays that although the Operating systems are fully operational at the time of their launch but they involve continuous tweaking every now and then to remain up to date. As the technology around us transfers all the time, the operating system of our electronic computer must reconcile our maturating demands. There are ordinary Windows XP update drivers that are issued on a periodic basis in order to hold new hardware. The computer hardware marketplace sees the launch of new computer hardware every now and then.
Device Drivers are what help the computing device figure out what to make with every last part of computer hardware installed. They interface with the devices and your electronic computer so that every piece of device (mouse, picture card, keyboard, sound card, monitor, printer, modem, etc) will operate perfectly.
Straight Off, we also acknowledge that Microsoft is always elevating their products, but this does not mean you own to preserve purchasing the modern release. What you can do though is get an upgrade for the Windows XP driver of your devices.
It may be very unclear to receive the perfect driver you demand, so here’s where you need automatic driver update software program. This will do all the updating of all the device drivers of all your devices in the heartbeat of an eye.
Windows XP was launched quite a few years back when it did not support many of the present day computer hardware, but step by step the Windows XP update drivers were brought out and it began bearing these hardware as well.
Speculate you have just purchased the trendy gaming card in the marketplace, you should most surely own the passable Windows XP update drivers in order to utilize the full potential of your
Finding Windows XP Device Driver Updates is More Accessible Than You Recall!
CPU. Without particular drivers the hardware goes futile. Attempt to update your device drivers as often as doable, as the new device drivers are constructed to contribute wider compatibility. If you bear a proprietary computer hardware manufacturer then ensure to see whether your device is supported before downloading the Windows XP update drivers. Make sure you support the robotic updates feature on; this will help your PC to download the device drivers whenever it needs them. There are complete fixes and patches usable on a semiannual basis, so stay informed.
Times have changed, and now you can easily relieve yourself hundreds of dollars because you can arrange it on your own! You don’t even sustain to be a whiz, you just require a wiz software program, or at the very least, a positive one.
At present, there is 1 software system product you can debate Driver Robot. This software program is will scan your computing device to assure what you have installed, then ensure the upgrades for you mechanically. I have found Driver Robot to be a bit more pleasing, because it has a wider database of drivers.
I’m am the author of Driver Software Review. For more information on how to update your Windows XP Update Drivers please visit Windows XP Update Drivers.
Article Source: Obtaining Windows XP Driver Updates is More Gettable Than You Remember!
STOP errors are very common in Microsoft Windows operating system. These errors might be caused by software malfunction, incompatible hardware drivers and other similar reasons. When a stop error occurs, Windows stops responding and you get an error with some codes on a blue or black screen. When a stop error occurs, the system become unusable and all of the hard drive partitions become inaccessible. This behavior might cause partition loss in some cases and require Partition Recovery to be sorted out.
In a practical scenario, when you attempt to start Microsoft Windows XP computer, you might come across any of the below given STOP error messages:
STOP: 0xc000026C [Unable to load device driver] DriverName
Or
STOP: 0xc0000221 [Unable to load device driver] DriverName
Or
STOP: 0xc0000221. Bad image check sum, the image user32.dll is possibly corrupt.
The header check sum does not match the computed check sum.
Here the DriverName is name of device driver file which is faulty. At this point all of your hard drive partitions become inaccessible and you need to find out the cause of this behavior and sort it out by carrying out Partition Recovery.
Grounds of this problem
This issue with your Windows computer might take place if any of the below given conditions are true:
The User32.dll file of your Windows system is either missing or corrupt.
Any device driver (.sys) file is either damaged or missing. The missing or corruption file is possibly a driver file, which the alert message mentions.
Resolution
In order to fix this issue, use appropriate solutions for specific symptoms. If the problem is due to damaged or missing device driver, user Windows Recovery Console for replacing damaged or missing driver file. To do so, you will need Windows Installation CD.
On the other hand, if the problem is due to damaged or missing User32.dll file using Windows Installation CD. But in some cases, this process might require in-place upgrade of Windows that requires formatting of hard drive and removes all the hard drive partitions, resulting into critical partition loss situations.
You can handle such cases easily using Partition Recovery Software. These applications use efficient scanning mechanisms to methodically scan entire hard drive and retrieve lost Windows partitions. The Partition Recovery Software are quite easy to use and always perform safe recovery.
Stellar Phoenix Windows Data Recovery is the most excellent solution for all your partition loss problems. It recovers all FAT32, VFAT, NTFS and NTFS5 file system partitions. This software is designed for Microsoft Windows 7 RC1, Vista, 2003, XP and 2000.
Author describes the partition loss which occurred due to stop error also gives some tips of partition recovery and suggested to use partition recovery software for any kind of partition related problems.
Article Source: STOP Errors Might Cause Partition Loss in Windows
The hard drive partition, which is used by the system using Extensible Firmware Interface (EFI) is known as the EFI system partition. These Windows partitions are formatted using the FAT variant (such as FAT32 and VFAT). The store critical information such as boot loader, system tools and device driver files, which are required prior the loading of Microsoft Windows operating system.
You are suggested to take the EFI system partition as the first one, when you partition a Windows hard drive. However, when any other hard drive partition such as MSR (Microsoft Reserved) partition or the data partition is used as first partition, the system may not start. In such cases, all of the partitions may become inaccessible and critical partition loss situations occur. Partition Recovery is required to overcome these problems.
The computer system using first partition that is other than the EFI system partition may come across a number of issues, when the users try to install Microsoft Windows XP Professional or Microsoft Windows Server 2003 (Enterprise and Data Center editions) on an Itanium based computer. In these situations, some error message might occur with the text-mode part of Setup. This issue generally occurs when the Setup itself of the user attempts to create the EFI system partition.
Computer system using Intel Itanium architecture with the Intel Microprocessors are known as the Itanium based computers.
Resolution
Follow underwritten steps to carry out Partition Recovery by resolving this problem:
Backup all the critical data from ESI system partition and the first partition of hard drive. This is also suggested to check backup status regularly with media integrity and required fields.
Delete first and then other EFI system partitions. You can use Windows PE or Recovery Console for this purpose.
In such situations, if the backup is not available or you delete the hard drive partition, partition loss will occur. In order to recover lost partitions, Partition Recovery Software are available. These are robust third party applications, which perform in-depth scan of your drive using effectual scanning methods.
These tools have self-descriptive and interactive user interface and thus allow you to have quick and easy recovery on your own. The Partition Recovery Software work on a wide range of storage media such as hard drive, memory card, USB drive, FireWire, CD, DVD and so forth.
Stellar Phoenix Windows Data Recovery is the foremost Partition Recovery Software. This read-only Partition Recovery tool recovers data from lost, corrupted, deleted and formatted partitions and volumes. It supports FAT16, FAT32, vFAT, NTFS and NTFS5 file systems based Windows partitions and volumes. The software is compatible with Windows Vista, XP, 2003 and 2000.
Author is researching on partition and system booting problem also explains the causes of Partition loss. Author has given partition recovery solution to recover your data from hard drive with the help of partition recovery software.
Article Source: Partition Recovery For the EFI Windows Hard Drive Partitions
When you attach a new hardware to your system, you need to install a device driver that controls that all the functioning of that particular hardware device. A device driver basically converts the I/O instructions of the operating system that the hardware device can understand. A STOP error message after the installation of a device driver primarily occurs if the driver contains a bug or is incompatible with your system. In most cases of occurrence of STOP error message, the hard drive becomes unmountable making all the data stored in the hard drive inaccessible. To access the data in such situations, an ideal solution is to restore the data from an updated backup. However, if no backup is available or backup falls short to restore the required information, then you will need to use advanced partition recovery software that can recover all the lost information.
Consider a practical scenario, where you encounter the below error message after you attempt to restart your system after installing a new device driver:
“x000000A7: BAD_EXHANDLE”
Data stored in the hard drive becomes inaccessible after the above error message appears. In addition, you encounter the same error message each time you try to restart your system.
Cause:
The root cause for the occurrence of the above error message is installation of a bugged device driver.
Resolution:
To troubleshoot and resolve the above error message and access the data, you will need to follow these measures:
• Check whether the installed driver is upgraded or not.
• Remove the last installed device driver.
• Select Last Known Good Configuration when you boot your system.
However, if you receive the same error message even after applying all the above measures, then you will need to reinstall Windows. A fresh reinstall of Windows erases all the files and folders saved on the hard drive partition. To recover all the lost data after formatting your hard drive, you will need to opt for efficient Partition Recovery software. Such File Recovery applications use effective scanning algorithms to comprehensively scan and recover your lost data from a formatted hard drive. With highly interactive and intuitive user-interface, these utilities serve as easy-to-understand and recovery centric tools.
Stellar Phoenix Windows Data Recovery is the finest File Recovery software. It provides recovery of lost files and folders from corrupted, deleted, formatted or lost hard drive partitions. The read only software supports 185 varied file types. It is compatible with FAT32, VFAT, NTFS and NTFS5 file systems. The software is designed for Windows 7 (Currently in RC1), Vista, XP, 2003 and 2000.
K madhav is a data recovery expert and doing research on file recovery and partition recovery
Article Source: How to resolve “0×000000A7: BAD_EXHANDLE” Error Message in Windows Vista, XP and 2000
A device driver or software driver is a program that controls and communicates with the hardware device connected to your system. These drivers are operating system specific and hardware dependent. Corruption in device drivers primarily occurs due to improper system shutdown, operating system malfunctioning, software bugs and more. Once the device driver gets corrupted or damaged, you encounter a STOP error message. Two major consequences that you will encounter as a result of the STOP error message are unbootable hard drive and data inaccessibility. To resolve such data loss situations, an ideal solution is to restore your data from the latest backup. However, if no backup is available or backup falls short to restore the required data, If you have no backup then you need to use powerful data recovery software to recover your lost data.
As a practical case, you encounter the below error message when you attempt to start your Windows Vista based computer after installing a new device driver:
“Driver_corrupted_mmpool
stop: 0×000000d0 (0×00000008, 0×00000002, 0×00000000, 0×805493e2)”
The four parameters in the above error message are described below:
1st parameter – Memory referenced
2nd parameter – IRQL at time of reference
3rd parameter – 0: Read, 1: Write
4th parameter – Address that referenced memory
Data saved in the hard drive becomes inaccessible after the above error message appears. In addition, you receive the same error message each time you attempt to start your system.
Cause:
The root cause for the occurrence of the above error message is the corruption of the system pool due to damaged device driver. The above error message primarily occurs when the kernel attempts to access invalid memory when the IRQL (Interrupt Request Level) is very high.
Resolution:
To resolve the above error message and access the data, you will need to take these measures:
• Uninstall the Last Installed device driver
• Get the latest Drivers and install them on your system
• Get the latest Updates on device drivers
However, if all the above measures fail to perform, the best option is to perform clean reinstall of Windows Vista. A clean reinstall of Windows Vista will erase all the data from the selected hard drive partition. To comprehensively recover the data in such circumstances, you need to opt for efficient data recovery software. These data recovery Tools employ advanced scanning methods to recover lost data from a formatted hard drive. Built with intuitive user-interface, automated recovery procedure and powerful features, these data recovery tools are as easy-to-understand and implement.
Stellar Phoenix Windows Data Recovery is a powerful data recovery application. The read only tool recovers lost data from corrupted, deleted, formatted or lost hard drive partitions and volumes. The software natively supports 185 different file types. It is compatible with FAT16, FAT32, VFAT, NTFS and NTFS5 file systems. The tool supports Windows 7 (Currently in RC1), Vista, XP, 2003 and 2000.
K madhav is a data recovery expert and doing research on data recovery and hard drive recovery
Article Source: How to Solve Error Message in Windows Vista “Driver_Corrupted_Mmpool”
To add a new hardware to your system, you need to install a device driver for that particular hardware device. While installing a compatible device driver allows the operating system to communicate with the hardware, an incompatible or corrupted device driver installation can result into a STOP error message. Data saved in your system becomes inaccessible after you encounter a STOP error message. For complete restoration of lost data, an updated backup acts as a boon. However, in absence of an updated backup, you need to use advanced Partition Recovery application that can recover your lost data.
Consider a practical scenario, where you install a HP printer driver on your system. After the installation process is over and you restart your system, you encounter any of the below error messages:
“Stop 0×000000e3 (0×81d534c8, 0×8210fc20, 0×00000000, 0×00000002)
RESOURCE_NOT_OWNED”
The four parameters in the above error message differ with system’s configuration.
Or
“STOP 0×000000E3 RESOURCE_NOT_OWNED”
Data saved in the hard drive becomes inaccessible after any of the above error messages appears.
Cause:
The root cause for the occurrence of any of the above error message is the installation of Hewlett-Packard (HP) printer driver that contains the Hpbfff2.dll file.
Resolution:
To resolve the above issue and access the data, you need to update your computer to the printer driver included on the Windows 2000 Server CD-ROM. To do so, you will need to follow the below steps:
1. You need to click Start, select Settings, and then click Printers.
2. On the File menu, click Server Properties.
3. Click the Drivers tab and select HP driver in the installed printer drivers box that uses the Hpbfff2.dll file.
4. Click Remove, and then click OK.
NOTE: To determine which files a driver is using, click the driver in the Installed printer drivers box, and then click Properties. The Driver Properties dialog box lists the files used by the driver.
5. Reinstall the printer by using the drivers included on the Windows 2000 CD-ROM.
6. Repeat steps 4 and 5 for each printer driver using the Hpbfff2.dll file.
7. Click Close.
However, if all the steps fail to resolve the problem and you still encounter the same error message, then you need to opt for effective Partition Recovery Software. These Partition Recovery utilities incorporate advanced scanning mechanisms to recover lost data from your hard drive. Built with intuitive user-interface, automated recovery procedure and powerful features, these applications serve as self-explanatory and recovery centric tools.
Stellar Phoenix Windows Data Recovery is a reliable Partition Data Recovery Software. The read only tool recovers lost data from corrupted, deleted, formatted or lost hard drive partitions and volumes. It supports 185 different file types that can be further extended. The software is compatible with FAT32, VFAT, NTFS and NTFS5 file systems. It is designed for Windows 7 (Currently in RC1), Vista, XP, 2003 and 2000.
Author is student of mass communication and told some safety measures while going to do partition recovery through partition recovery software.Author is working as a freelancer for data recovery company.
Article Source: Rectifying “Resource Not Owned” Error Message in Windows
Looking to fix missing DLL files in XP home edition? Look no further.
DLL stands for Dynamic Link Library. Although these files do not gather much attention from the average PC user due to their ‘backstage’ role, they are highly important when it comes to the functionality of almost all pieces of software on your PC.
They provide certain functions that are called upon by other executable files. Rather ironically, the introduction of DLL file technology was to help simplify software functionality and operation, but when problems in the DLL files arise, it can often have the opposite effect.
Missing DLL file errors can arise for 3 reasons:
An essential DLL file has been deleted accidentally or during the uninstallation of a particular piece of software
DLL files have become corrupt for one reason or another
DLL files have become infected with a virus
If you are encountering a missing DLL file error, it is highly likely that it has been caused by one of the above reasons.
In order to rectify the problem, there are a number of possible solutions that you should try in turn.
1.Re-install the software that you previously removed just before you encountered the DLL file error. If the reason for your DLL file error occurring is because of accidental removal then this should replace the missing DLL file and allow the software in question to function properly once again.
2.Re-install the software that is actually generating the DLL error. Again, this should fix missing DLL files in XP home edition. If, that is, your DLL error is occurring due to accidental removal.
3.Update the program/device driver that you have recently installed. Often, old DLL files can overwrite the existing DLL files and cause problems. In order to rectify this issue, you must update your program or device driver via the manufacturer or developer’s website.
4.Run a registry scan and repair your Windows registry. If your DLL error is arising due to corrupt or virally infected DLL files, giving your registry a free registry scan can help to clarify the problem and allow you to repair the DLL files in question.
In order to get the most from your free registry scan and ensure that the corrupted or infected entries are not missed or overlooked by the registry cleaning software, you must use a tried and tested cleaner.
We performed independent tests on 10 of the most popular registry cleaners available on the market today, bringing you an objective recommendation as to which registry cleaner you should use for your FREE scan.
In independent testing, one cleaner scored a hugely impressive 5 out of 5 in terms of registry repair skills, scoring an outstanding 4.5 out of 5 in the overall test. This positioned the registry cleaner as number 1 amongst all 10 registry cleaners tested.
It truly is the ultimate registry cleaning software package for seeking and destroying missing DLL errors; allowing you to fix missing DLL files in XP home edition.
To allow yourself to fix missing DLL files in XP home edition, perform a no obligation, FREE registry error scan today by clicking the link below:
http://www.registry2aid.com/Free-Registry-Scan.html
You really do have nothing to lose.
Don’t put up with your computer problems. Eliminate them. Give your registry a scan today at http://www.registry2aid.com
Article Source: Quickly and Safely Fix Missing DLL Files In XP Home Edition
Perplexed with trying to fix a computer that will not find a keyboard?
Frustrating, isn’t it.
Already tried re-installing the device driver?
Checked that the hardware is in full working order?
Checked the cables and connections to the PC?
Cleaned your keyboard thoroughly?
If you answered yes to all of the above, we may just have the solution for you.
Your problem is likely to reside in your Windows registry.
You see, your registry acts very much like an instruction manual to your computer; telling it how to perform certain tasks and applications successfully without interruption. This includes the proper functioning of your keyboard.
When a registry entry becomes corrupt or redundant for one reason or another, it means that your computer can no longer understand the instructions that it is being given and as a result, the respective piece of hardware or software that the corrupt instructions relate to, fail to work properly.
This is one of the most common causes of keyboard failure. Yet it is also surprisingly easy to fix a computer that will not find a keyboard.
Uninstalling and re-installing the device driver for your keyboard can prove ineffective in this instance, given that the uninstall feature often fails to remove all of the instructions from the registry; leaving the problem to remain and subsequently re-appear upon re-installation of the device driver.
You must therefore go further than a simple uninstall procedure and get deep into your registry to clean out all corrupt and invalid entries; leaving it clutter, and more importantly, error free.
For this you must use specialized registry cleaning software.
Registry cleaning software burrows deep into your Windows registry and weeds out all unnecessary and corrupt entries, displaying these to you in just less than 2 minutes. You will then be presented with the opportunity to remove these from your registry for good.
Once this has been done, you will be free to re-install your keyboard device driver and enjoy the ability to fix a computer that will not find a keyboard.
With so many registry cleaners on the market, and with it being of paramount importance that ALL corrupt entries are removed to allow for a fresh re-install of your keyboard device driver, we tested 10 of the most popular registry cleaning software packages on the market; bringing you the highest performing registry cleaner available.
Note: We are not, in any way, affiliated to any registry cleaning software. We performed this testing in order to give you, the user, an informed perspective when choosing your registry cleaning software package.
In our independent testing, one cleaner was the highest performer, scoring a hugely impressive 5 out of 5 in terms of registry repair skills, and an outstanding 4.5 out of 5 in the overall test. This positioned the registry cleaner as number 1 amongst all 10 registry cleaners tested.
We therefore invite you to take a completely FREE registry scan by Perfect Optimizer to allow you to seek out your corrupt registry entries and fix a computer that will not find a keyboard.
http://www.registry2aid.com/Free-Registry-Scan.html
You really do have nothing to lose.
To fix your keyboard problems in fewer than 2 minutes, give your registry a scan today at http://www.registry2aid.com
Article Source: Fix A Computer That Will Not Find A Keyboard, In No Time At All
A driver is a computer program that interacts with the hardware devices attached to your system. The program communicates with the hardware device with the help of computer bus or communication subsystems. These drivers are operating system specific and hardware dependent. Installation of an incompatible or corrupted device driver in Windows might result as a STOP error message. Such error messages result in unbootable hard drive and inaccessible data. For complete recovery of data under such data loss scenarios, you need to restore the data from an up-to-date backup. However, if you have not created any backup or the backup fails to restore the required data, then you need to use advanced data recovery software to recover the lost data.
Consider a practical scenario, where you receive either of the below error messages (or a combination of both) when you start your system after installing a device driver:
“STOP: 0×00000053”
Or
“NO_BOOT_DEVICE”
Or
“STOP: 0×00000053 (parameter, parameter, parameter, parameter) NO_BOOT_DEVICE”
Data saved in the Windows hard drive becomes inaccessible after occurrence of any of the above error messages. Furthermore, you encounter the above error message(s) each time you attempt to boot your system.
Cause:
The error messages are caused due to corruption of device driver.
Resolution:
To troubleshoot and resolve the above error messages, you need to follow these measures:
* Start your system with Last Known Good Configuration option to undo the recent registry and driver changes.
* Use System Restore to undo recent system changes.
* Rollback device driver to the version prior to your driver update.
However, if the above resolutions fail to perform and the data remains inaccessible, the best option is to reinstall Windows. A clean reinstall of Windows will erase all data from the selected hard drive partition. To recover the lost data from a formatted hard drive, you need to opt for advanced data recovery software file recovery. Such Data Recovery Tools incorporate powerful scanning algorithms for complete recovery and restoration of the lost data. With highly graphical user interface, to-the-point documentation, automated recovery procedure and advanced recovery features, these recovery applications work as easy to use data recovery solutions.
Stellar Phoenix Windows Data Recovery is the most powerful and feature rich data recovery software. The tool supports 185 diverse file types and provides absolute recovery of data from corrupted, deleted, formatted or lost hard drive partitions and volumes. It supports FAT16, FAT32, vFAT, NTFS and NTFS5 file systems. The software is designed for Windows 7 (currently in RC1), Vista, XP, 2003 and 2000.
Article Source: Resolving “NO_BOOT_DEVICE” Error Message at Windows Startup
A device driver is a computer program that uses computer bus or communication subsystem to interact with the hardware components. Each device driver is hardware-dependent and operating system specific. However, if a device driver gets replaced by another device driver (that does not support that operating system), a STOP error message might occur. Such STOP error messages make your operating system unbootable and data inaccessible. After such situations, you need to use an up-to-date and valid data backup to completely restore the lost files. But, if there is no such backup available or it falls short of restoring the lost data, then you need to opt for advanced data recovery software.
Consider a practical scenario, where you encounter the below error message when you start your system where the video adapter has the TV tuner or video capture feature:
“STOP: 0×000000CE (0xHEXNUM1, 0xHEXNUM2, 0xHEXNUM3, 0xHEXNUM4) in DXAPI.SYS
“DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS”
0xHEXNUM1, memory referenced
0xHEXNUM2, value 0 = read operation, 1 = write operation
0xHEXNUM3, If non-zero, the instruction address which referenced the bad memory address.
0xHEXNUM4 N/A”
The four parameters within the parentheses vary, depending on the system configuration.
The data saved in the hard drive becomes inaccessible after the occurrence of the above STOP error message. In addition, you encounter the same error each time you attempt to start your system.
Cause:
The above error primarily occurs if a Windows 2000 version of a driver replaces the Windows XP version of the driver. This replacement can take place without your knowledge when you install DVD or TV tuner software or programs from an older CD-ROM that installs drivers which are not designed for Windows XP.
Resolution:
To trouble shoot and resolve the above issue, you will need to reinstall updated DirectX device drivers that are designed to work with Windows XP. However, if the Windows XP CD-ROM does not contain device drivers for your device, then you will need to take these measures:
• Look for updated drivers on the Microsoft Windows Update website.
• If updated drivers are not yet available there, look on the manufacturer’s website
• Contact the support for updated drivers, if provided by the manufacturer.
However, if the above resolutions fall short to resolve the issue and data still remains inaccessible, then you need to reinstall Windows XP. A clean install of Windows XP will erase all the data from the selected partition. In such situations, you need to opt for efficient data recovery software to recover your lost data. Such data recovery tools incorporate high end scanning methods to comprehensively scan, recover and restore the lost data from your hard drive. These recovery utilities serve as easy to understand data recovery applications with to-the-point documentation, self-explanatory user interface, automated recovery procedure and advanced recovery features.
Stellar Phoenix Windows Data Recovery is the foremost data recovery application. It provides complete recovery of data from corrupted, deleted, formatted or lost hard drive partitions or volumes. The software is compatible with FAT16, FAT32, VFAT, NTFS and NTFS5 file systems. It supports Windows 7 (currently in RC1), Vista, XP, 2003 and 2000.
k madhav is data recovery expert and doing research on hard drive recovery and data recovery
Article Source: How to Resolve “STOP 0×000000CE in Dxapi.sys” in Windows XP Operating System
Installing an upgraded version of the Windows operating system enables you to use the advanced features added in it. While the upgradation process benefits you in many ways, it might also result as a STOP error message when it fails. The occurrence of STOP error message makes the system unbootable or halts it (when the bootup process is already finished) making all the data inaccessible. The best possible way to restore the data in such situations is by using an up-to-date and valid data backup. However, in case of absence of an updated backup, you need to opt for advanced data recovery software to completely recover and restore your lost data.
Consider a practical scenario, where you upgrade your system from Windows 2000 to Windows XP. When you bootup your system after upgradation, you encounter the below error message:
“STOP: 0×0000007E (0xC0000005, 0×804E518E, 0xFC938104, 0xFC937E04)
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED”
WUSB54GCx86.sys- Address 92D89498 base at 92D7c000, Datestamp 45c04cc9
The four parameters in the above error message differ with the computer’s configuration.
WUSB54GCx86.sys is the name of driver file that might cause the error.
You encounter the same error message each time you attempt to start your system.
Cause:
The above error message mainly occurs if your computer generates an exception that the error handler does not catch. This exception can be caused by any of the following:
• If the STOP error occurs after the first restart during Windows Setup or after Setup is complete, the system might not have sufficient hard disk space to install Windows XP.
• The computer BIOS (Basic Input Output System) might be incompatible with Windows XP and it needs to be updated.
• The video adapter drivers might be incompatible with Windows XP.
• A device driver or a system service might be corrupted or damaged.
• If the problem is associated with the Win32k.sys file, it might be caused by a third-party remote control program.
Resolution:
To troubleshoot and resolve the above issue, you will need to follow these steps:
• Make sure that you have sufficient hard disk space
• Update the computer BIOS
• Disable the device or update device drivers
• Remove unsigned drivers
• Remove all third-party drivers
• Remove third-party remote control services
But, if all the above resolutions fail to resolve the STOP error message and the data still remains inaccessible, then you need to use go for a clean reinstall of Windows XP. A fresh reinstall erases all the data from the selected partition. In the absence of an up-to-date data backup, the data recovery software can recover all your lost data. Such data recovery tools apply high end scanning algorithms to completely scan, recover and restore the lost data from formatted hard drive partitions.
Stellar Phoenix Windows Data Recovery is the foremost data recovery tool that ensures comprehensive recovery of data. It can recover data from corrupted, deleted, formatted or lost hard drive partitions. The software is compatible with FAT16, FAT32, vFAT, NTFS and NTFS5 file systems. It supports Windows 7, Vista, XP, 2003 and 2000.
k madhav is data recovery expert and doing research on hard drive recovery and data recovery
Article Source: How to Resolve “SYSTEM THREAD EXCEPTION NOT HANDLED” Error Message in Windows
Microsoft Windows XP is a popular operating system for personal computers, media centers, notebook computers and workstations. You can install Windows XP as a clean operating system copy or by upgrading from an existing version of Windows like Windows 98 SE. You should always maintain an updated data backup when you upgrade your operating system or opt for a clean reinstall. By using an up-to-date backup, you can restore all lost data post events like Windows XP upgrade failure, partition deletion, accidental/erroneous disk format operation, power failure and more. If you lose data and no valid data backup is available, you can use commercial data recovery software for complete recovery.
Consider a situation, you try to install Windows XP and it fails with an error message as:
“STOP: 0×0000000A (parameter1, parameter2, parameter3, parameter4)
IRQL_NOT_LESS_OR_EQUAL
*** Address x has base at x – filename”
Where, parameter1, parameter2, parameter3 and parameter4 refer to incorrectly referenced address, required IRQL, type of access, and address of instruction referencing memory in parameter1respectively. You may also get this error message after installing Windows XP. It is specific to Windows XP Professional and Home Edition.
Cause
It occurs when system attempts to touch pageable memory at too high a process IRQL (Interrupt Request Level). It happens in kernel mode due to these reasons:
• Driver utilizes an incorrect memory address
• Incompatible device driver or software
• Hardware issues
Solution
If you encounter the above error while installing Windows XP, you need to follow these steps:
• Make sure that installed hardware components are compatible with Windows XP
• Specify HAL (Hardware Abstraction Layer) during installation startup using F5 during the startup of installation
• Try to turn off some features in CMOS (Complementary Metal Oxide Semiconductor) settings
• Verify RAM
• Try removing adapters and disconnecting hardware devices
• Update drivers
• Go for a clean installation of Windows XP and restore data from backup
If this problem arises after installing Windows XP, use these methods:
• If you have recently installed any third-party hardware or software, try removing or disabling them
• Restore system to Last Known Good Configuration
• Try to repair Windows XP installation
• If Safe Mode is working, use Rollback Driver feature
• If Safe Mode is working, use Windows XP System Restore
• Try renaming problematic software or driver
• Restore Windows using Recovery Console
• Reformat the hard disk and use recent data backup to restore the data.
If after reformatting the hard disk, you discover that backup is not up-to-date or is unable to deliver expected results, you need to choose efficient hard drive recovery utilities to recover all lost data. These hard disk recovery tools are designed to safely scan your drive and recover lost files.
Phoenix Windows data recovery software is the finest data recovery tools.
It is equipped with advanced features like RAW Recovery, Drive Imaging, E-Mail Recovery and more. The software supports FAT16, FAT32, vFAT, NTFS, and NTFS5 file systems based Windows partitions and volumes. It is compatible with Windows Vista, XP, 2003 and 2000.
K madhav is a data recovery expert and doing research on data recovery software and hard drive recovery.
Article Source: Tips How to STOP Error 0xA While or After Installing windows XP
Windows XP and Server 2003 are Windows NT based operating systems. But sometimes, they can cause serious error messages if Windows NT kernel discovers some issues with its integral processes. In critical situations, you may need to take complete backup of data and reformat the hard disk. In case if backup is unavailable, damaged or not updated, you should go for Hard Disk Recovery applications to extract the lost data.
You might encounter following error message with your Windows server or workstation:
“STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000034 (0×00000000 0×0000000)
The system has been shutdown.”
This error message is specific to Windows XP (Professional, Media Center and Table PC Edition) and Server 2003 (Standard, Datacenter, Enterprise and Web Edition).
Cause
Windows displays this error message when either winlogon.exe or csrss.exe process fails.
Winlogon.exe is the process related to Windows Login Manager and is responsible for handling tasks like applying secure attention sequence, locking the computer system etc.
CSRSS stands for Client/Server Runtime Subsystem. Csrss.exe is the process responsible for creating and deleting threads and performing console Windows tasks.
It may occur due to the following reasons:
Failed Service Pack installation
Incompatible device driver or system service
Incompatible third-party application
Mismatched system files
Hard disk backup program has not correctly restored some of the files
Solution
You can follow these steps to resolve the issue:
If you have recently installed any service pack, device driver or third party application, try uninstalling or disabling it.
If the problem persists, start the system using Last Known Good Configuration (Windows Advanced Option).
You can perform in-place upgrade of Windows
You can also use Recovery Console to remove incompatible software
Reformat the hard disk and restore data using recent data backup. In case of missing or invalid data backup, you can use hard drive recovery software applications. These are special tools that use specific scanning algorithms to analyze corrupted or affected hard drives post data loss. Hard Drive Recovery applications are read-only tools with user-friendly interface. You can use these software in any logical case of data loss like formatted hard disk, accidental file deletion, file system corruption etc.
Stellar Phoenix Windows Data Recovery is a complete hard drive recovery tool to recover lost data. The application offers various advanced features like RAW File Recovery, File Filter, Create Image etc. It is compatible with NTFS5, NTFS, vFAT, FAT32 and FAT16 file systems. This Hard Drive Recovery supports Windows Vista, XP, 2003 and 2000.
Simpson a student of Mass Communication doing research on hard drive recovery software. He is also a freelancer for partition recovery software .
Article Source: Stop Error 0xc000021A and Recovery
In most cases, the outcome for a corrupted driver results in a STOP error message. After you encounter the STOP error message, you may not be able to boot the system. Moreover, the data stored in the hard drive becomes inaccessible. In such situations, you need to recover your data from the latest backup. But, if you have not maintained any backup or the backup fails to deliver the required data, then you need to use advanced Data Recovery Software.
When you attempt to boot a Windows XP based computer, you receive the below error message:
“STOP: (parameter 1, parameter 2, parameter 3, parameter 4) SESSION3_INITIALIZATION_FAILED”
You encounter the same error message each time you attempt to start your computer system. After the above error message appears, the data saved in the hard drive becomes inaccessible.
Cause:
The primary reason for the occurrence of the above error message is device driver corruption.
Resolution:
To resolve the above error and access the data, you should firstly remove the additional hardware attached to the computer. After doing so, you need to use the Windows XP operating system disk to view all the contents of Windows folder named drivers (‘%windows%\system32\drivers’). If you find any files such as TDSS????.sys or TDSS????.DLL, you need to remove them and restart the system.
However, if you receive the same error message when you restart your system, you need to go for clean Windows reinstall. A clean reinstall of the operating system will erase all the data saved in hard drive. To completely recover and restore the lost data, you need to use efficient Data Recovery tools.
These Data Recovery tools incorporate powerful scanning methods to provide comprehensive recovery of lost data. Such utilities provide simple user interface with advanced features for instant or in-depth recovery.
Windows Data Recovery is the most influential Data Recovery Software. It provides precise recovery of lost, deleted and inaccessible data. It can even recover data from corrupted, deleted or formatted partitions and volumes. It is compatible with FAT16, FAT32, vFAT, NTFS and NTFS5 file systems. It supports Windows Vista, XP, 2003 and 2000.
K Madhav is a student of Mass Communication and doing research on File Recovery and Data Recovery.
Article Source: How to Solve Stop Error Message at Windows XP startup
If you have been working on computers or are just starting to use them, one of the most disturbing events that can occur is the BSOD or Blue Screen of Death. The BSOD is actually an error screen that is displayed by specific operating systems informing the user that a critical system error has occurred. The Blue Screen of Death can be found on many different types of operating systems, but is most notably infamous for occurring on Microsoft Windows Operating Systems.
Understanding the Blue Screen of Death
It should be noted that when a stop error occurs and your computer displays the Blue Screen of Death, you will also usually be able to see a message. The message might state a FILE_SYSTEM and a number: 0×00000022. Copy this number down, it can be used later to understand and determine why the error occurred. Usually you can visit Microsoft.com and input the error number into their database to find out more information, a description regarding the error and possible fixes for the error.
Common Causes of the Blue Screen of Death Occurring
The Blue Screen of Death is usually caused due to a few specific reasons including a poorly written device driver, faulty memory, and incompatible DLL’s or a corrupt Registry.
Poorly written device driver: A device driver is usually created by a third party company to run a device such as a peripheral (printer, scanner, mouse, etc). These third party companies’s create small driver programs which make it possible for these devices to work on a specific operating system, however many times these small programs can be buggy causing incompatibility which can result in the BSOD.
Faulty memory: Faulty memory can occur when a computer is processing memory intensive operations. For instance, a defective hard drive or RAM can cause an operating system to encounter a problem with the memory causing the BSOD. In certain cases, heat or other conditions can cause memory components to fail causing the BSOD.
Incompatible DLL’s: DLL’s are dynamic link libraries which are part of the operating system’s shared library concept. These DLL’s are files that are necessary for certain programs to run or processes to take place. If a DLL is not found or there is a problem with the file, this may cause the BSOD. When a BSOD occurs due to DLL incompatibility, it is usually referred to as DLL hell. It should be noted that DLL’s are loaded into the memory of a computer each and every time an application needs them. As an application is used over and over again, the chances of an incompatible DLL file occurring increases. This is why many computer users notice that a freshly installed Windows operating system is much more stable than a computer that has a copy of Windows installed for a lengthy period of time.
Corrupt Registry: The registry is a database that Window’s operating system use to store configuration information regarding hardware and software, information used for set up and user preferences. If the registry is corrupt the BSOD may occur.
The History of the BSOD
The BSOD is synonymous with Microsoft, but does occur on other types of software. For instance, the Atari Jaguar has a Blue Screen of Death and Lotus Notes has a stop error screen extremely similar to the BSOD, except in red.
The Blue Screen of Death occurs on almost every operating system that Microsoft has sold including Windows 3.1, 95, 98, 2000, Windows NT, ME and XP. It should be noted that in MS DOS, a Black Screen of Death occurs and it is said that in Vista a Red Screen of Death (RSOD) occurs.
http://www.keep-pc-clean.com/
Article Source: Understanding the Blue Screen of Death